[TUTORIAL] HACK Wii 4.2E

Post by **mecano69** » Tue 16 Mar 2010 20:33

I'm going to try hacking it

Post by **bossniak** » Tue 16 Mar 2010 22:26

yeah I wanna see what's next :p

Post by **bossniak** » Wed 17 Mar 2010 01:11

hi, first of all thanks for everything, so I did everything just like the tutorial explains so well but my wii just doesn't work with the ciospack because its serial number starts with LEM10.......
so how do I proceed from there?? help me please

Post by **boub** » Wed 17 Mar 2010 05:19

I'm going to test that
I think I went a bit overboard on this one
thanks anyway

Post by **boub** » Wed 17 Mar 2010 05:33

Well indeed I screwed up
I did the nintendo update so my hbc channel got wiped out
only when I launch banner bomb to put it back
I get a warning message
here's what I get
"this installer can not continue!
there is no know vulnerable ios installed on this wii
please note that we will not use a fake signed ios due to security reason
look for an updated version at
https://bootmi.org
if this is already the latest version... well; suck it"
my english being more than limited ...
so I guess I have an ios that's not right ....
help me please

Post by **Oops** » Wed 17 Mar 2010 09:44

bossniak wrote:hi, first of all thanks for everything, so I did everything just like the tutorial explains so well but my wii just doesn't work with the ciospack because its serial number starts with LEM10.......
so how do I proceed from there?? help me please

SMS speak is banned on all forums. This one is no exception

boub wrote:Well indeed I screwed up
I did the nintendo update so my hbc channel got wiped out
only when I launch banner bomb to put it back
I get a warning message
here's what I get
"this installer can not continue!
there is no know vulnerable ios installed on this wii
please note that we will not use a fake signed ios due to security reason
look for an updated version at
https://bootmi.org
if this is already the latest version... well; suck it"
my english being more than limited ...
so I guess I have an ios that's not right ....
help me please

you must have an old cIOScorp or something like that affecting ios34. To fix the problem, you need to put wadmanager's boot.dol at the root of your SD in order to launch it with bannerbomb instead of hackmii installer. Once wadmanager is launched you'll look for a still-patched ios (250, 249, 36, 34) to install the ios34 wad:

This content is for members only. Log in or register for free to see it.

then you'll be able to launch hackmii installer and (re)install HBC, Bootmii (as boot2 preferably if your wii allows it) and DVDx while you're at it.

Post by **sll2286** » Wed 17 Mar 2010 09:51

Hi everyone!
Thanks for this tutorial, I'm trying it as soon as possible with a stock Black WII 4.2E!
I'll let you know how it goes once done.

SLL2286

Post by **boub** » Wed 17 Mar 2010 17:42

a big thank you oops for your speed and clarity in your explanation it's good succeeded reinstalling it
that famous channel
that's nice

Post by **oliver971** » Wed 17 Mar 2010 17:55

thanks for the info, I keep struggling.
What do I do when bootmi won't install

Post by **Oops** » Wed 17 Mar 2010 18:16

can you be more specific!!??

Post by **maniac** » Wed 17 Mar 2010 19:33

thanks for this tutorial

Post by **beciu** » Wed 17 Mar 2010 20:22

Oops wrote:are you sure you did the trucha bug restore part, and selected ios36 at the start, in any title deleter!!??

Good evening,

Thanks Oops, I made a mistake with "trucha bug restore" I hadn't selected network installation...

On the other hand at console startup I keep getting a black screen with 4.2E written at the bottom right, I do reset and power so I get to priiloader and I can't change anything anymore the mistake I made is that I had to move the console to go to another tv and obviously I had to unplug the wii and on restart my wii can no longer find my wiimote what should I do to get my wiimote back again?
It doesn't work with syncing

Post by **Oops** » Wed 17 Mar 2010 20:41

for your black screen with 4.2E written at the bottom right, it's because you enabled the "recovery or autoboot" that you shouldn't have in hack system menu.

For your desync issue, I don't see why if you followed the tutorial properly. it works fine with a GAMEcube pad.

Post by **darkscad** » Wed 17 Mar 2010 21:16

I wanted to help but oops is too fast!

Post by **angel123** » Wed 17 Mar 2010 21:36

thanks I'll go test that

Post by **gros nul** » Wed 17 Mar 2010 23:08

great, thanks you're truly amazing, don't change a thing.
Well done for all your tutorials.

Post by **steph-10** » Thu 18 Mar 2010 09:36

Well done. great tutorial.
I'm trying it right away

Post by **tonio264** » Thu 18 Mar 2010 11:49

thanks we'll test it

Post by **padaones** » Thu 18 Mar 2010 16:04

Thanks a lot for this great Tutorial

Post by **vincent33** » Thu 18 Mar 2010 16:46

Thanks I needed it

Post by **angel123** » Thu 18 Mar 2010 16:59

hello I'd like to know something important please

in this tutorial ------>

Waninkoko's Cios rev 17

*if you had already installed cios249 rev14 don't delete it just do another install,
the cios will be automatically replaced by rev17.(overwritten)

3- Installing Cios 249 rev 17
(required for Wiiflow ... and many hacks...)
rev 17 is compatible with Neogamma... (well )

* Installation without internet:
Place the IOS38-64-v3867.wad file at the root of your SD
with the wii remote's arrows set to "Wad Installation" then A.
(.wad included in the hackwii 4.2 pack)
then choose to install it with IOS36
Then confirm with "A", the installation starts... the wii's light comes on and a 'rock' melody plays!

* Installation with internet: choose "internet installation" then confirm with A
the installation starts with a nice blue light on the wii! etc...

at the end you'll get a [SUCCESS] message!
there you go you succeeded
Press any key... to exit.

Warning:
- The D3/D2nothing (new wii drive) makes installing IOS difficult. If your Wiimote freezes during the rev17 installation, it's because either ios15 or ios36 is badly installed. Start over from step 2-A.

WARNING
If you get this image...
it means you've messed up the Flash of your WII

I'm asking myself questions I don't know which ios to launch 38 or 36 not very well explained

and after arriving at 'Wad Installation' I get another prompt 'select source device
in usb mass storage device, in usb 2.0 mass storage device, in sd gecko slot a or slot b, in wii sd slot.

which one do I pick

Post by **casualties** » Thu 18 Mar 2010 17:55

Post by **sandria** » Thu 18 Mar 2010 18:53

thanks

Post by **tylockss97** » Thu 18 Mar 2010 19:26

Thanks really a big thank you for this tutorial that's helpful to wii owners

Post by **Oops** » Thu 18 Mar 2010 19:53

angel123 wrote:hello I'd like to know something important please

in this tutorial ------>

Waninkoko's Cios rev 17

*if you had already installed cios249 rev14 don't delete it just do another install,
the cios will be automatically replaced by rev17.(overwritten)

3- Installing Cios 249 rev 17
(required for Wiiflow ... and many hacks...)
rev 17 is compatible with Neogamma... (well )

* Installation without internet:
Place the IOS38-64-v3867.wad file at the root of your SD
with the wii remote's arrows set to "Wad Installation" then A.
(.wad included in the hackwii 4.2 pack)
then choose to install it with IOS36
Then confirm with "A", the installation starts... the wii's light comes on and a 'rock' melody plays!

* Installation with internet: choose "internet installation" then confirm with A
the installation starts with a nice blue light on the wii! etc...

at the end you'll get a [SUCCESS] message!
there you go you succeeded
Press any key... to exit.

Warning:
- The D3/D2nothing (new wii drive) makes installing IOS difficult. If your Wiimote freezes during the rev17 installation, it's because either ios15 or ios36 is badly installed. Start over from step 2-A.

WARNING
If you get this image...
it means you've messed up the Flash of your WII

I'm asking myself questions I don't know which ios to launch 38 or 36 not very well explained

and after arriving at 'Wad Installation' I get another prompt 'select source device
in usb mass storage device, in usb 2.0 mass storage device, in sd gecko slot a or slot b, in wii sd slot.

which one do I pick

your answer is in red... for the source it's obvious: SD slot

[TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Re: [TUTORIAL] HACK Wii 4.2E

Everything for Wii · Wii U · Switch

Related topics

Everything for Wii · Wii U · Switch