[TUTORIAL] HACK Wii 4.2E
-
juju42600
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Fri 28 May 2010 17:18
-
Freelucos
- Novice
- Members
- Posts: 17
- Joined: Thu 25 Jun 2009 17:39
-
amarg57
- Nouvel arrivant
- Members
- Posts: 5
- Joined: Tue 29 Dec 2009 23:35
-
fabiolione
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Fri 19 Feb 2010 13:27
-
Flanders281
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 29 May 2010 06:50
-
dtc74
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 29 May 2010 14:00
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
penutbar101
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 29 May 2010 15:31
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
darkscad wrote: Image unavailable (removed by its host)
[align=center]This Tutorial works just as well for a Black 4.2E Wii as for a White one.[/align][/color]
Disclaimer:
Warning: everything you do can be dangerous for your WII
neither I, nor the forum administrator, nor anyone on the TGAMES forum
will be held responsible for what you do.
To be done if you don't have two left hands but a brain that works!!!
You've fallen for NEW SUPER MARIO BROS WII,
or you fell for the update over the internet, your finger slipped and hit "I agree" to do it...
before Hacking your wii you are now on 4.2E
Don't panic, the Softmod for 4.2E exists by doing some simple steps.
HACK WII 4.2
SD Preparation
1- Starting the HACKComplete HACK WII 4.2E pack v.6Spoiler
Format your card (minimum 1GB recommended) in FAT!
avoid SDHC.
Download the 4.2e pack (write a message to unlock the message)
Hidden message
[align=center]Installing the Homebrews channel[/align]
Spoiler
Now that you've properly prepared your SD
Go to the SD card icon
You'll get this image. Confirm with A on the YES option.
Image unavailable (removed by its host)
Confirm with "1" on the wii remote.
You'll have 3 choices:
- Install homebrew channel
- Install DVDX
- Install BOOTMII in BOOT2 like on the image or in IOS (in that case the line will be purple)
Image unavailable (removed by its host)
Install all 3 choices.
Press [continue] => [install the homebrew channel] => [yes,continue] => [continue]
Do the same with DVDX.
And above all Bootmii according to the option offered (boot2 or ios)
Don't forget to create the bootmii files on the SD card.
PS: there's no point putting Bootmii in ios if you installed it in boot2 as shown in the video.
Tutorial from webs modified by me
[align=center]BOOTMII?[/align]
[align=center]Nand backup[/align]
Important WarningSpoiler
Now we're going to carry out a crucial step, to protect yourself against unpleasant surprises (brick).
If you're at this step it means you installed Bootmii in boot2 or in ios.
Together we're going to make a DUMP (backup) of the Nand.
What is the NAND??
it's the wii's internal memory, it contains all the information of your wii,
such as your game saves, the VC games (virtual console) and Wiiware ones, as well as all the IOS or Cios built into the system.
To put it in a picture, you could compare the Nand backup to a TIMECAPSULE created at a given moment T.
If there's a problem (brick), we reinject the Nand via bootmii and we find ourselves back at that moment T.
So the saves and everything else will be those from the moment of THE BACKUP.
For that, check out the illustrated tutorial by Xav91
Do a Dump (backup) of your NAND of the console with Bootmii.
Important information
* boot2 being impossible to install on the new Wiis... (white and black)
* Leave at least 528MB free on the SD card.
* I'd recommend a 1GB or 2GB max non-SDHC SD card formatted in FAT to do the nand dump.
*SD compatible with BOOTMIISpoiler
The wiimote isn't recognized in the BootMII menu
To navigate the BootMII menu using the front panel buttons
- Power button to move (to the right)
- Reset button to confirm
or with the Gamecube controller
- directional pad to move
- A to confirm
To start, go to this icon with POWER then confirm with RESET.
*NAND backup*
confirm again on this icon with RESET.
you'll arrive at this image (the background must be green, if it's red you're in Restore mode)
you're now ready to make the copy of the NAND.
Press the RESET button.
Copying the NAND to the SD (it's normal to find Bad blocks)
checking the NAND.
Check OK, press any button to exit.
Well done, you did it
make a backup of the NAND file and the Bootmii folder as well as the .key file
Keep these files carefully on your Computer.
It will be useful if the WII bricks one day!
I recommend doing another backup at the end of the tutorial!
That way you'll have 2 Nands (before and after Hack!)
tutorial by xav91
[align=center]TRUCHA BUG[/align][/color]
2 - Restoring the Trucha Bug
Downgrade with Trucha Bug Restorer 1.12
The wii must be connected to the internet.
otherwise it's faster and safer for those who might have connection problems...
you need the following files at the root of the SD:
(available on the forum)
Warning, when patching ios 36 the third option (patch nand permission)
must be enabled to be able to continue the tutorial.
* IOS15-64-v257.wad
* IOS15-64-v266.wad
* IOS15-64-v523.wad
* IOS36-64-v3094.wad
* IOS36-64-v3351.wad
Other Tutorial by xav91.Spoiler
1. launch Trucha Bug Restorer 1.12 mod with the homebrews channel.
2. press B
3. wait then press 1
4. Select "Downgrade IOS15"
5. press A (getting IOS15 rev 523)
6. press A (getting IOS15 rev 257)
7. press A for step 1
8. press A for step 2
9. press A to exit
10. relaunch
11. select ios15 with left on the wiimote then press A
12. wait then press 1
13. select "IOS36 menu"
14. check all options to YES
so the new option ES verify
(not shown in the photo, new photos coming soon)
WARNING don't forget this step of the tutorial...
make sure you've checked all the options to YES using the wii remote's directional cross.
otherwise you won't be able to install cios 249
and therefore continue the tutorial!
15. press A (getting rev 3351)
16. press A to install (Installing.... done)
17. press A to exit
18. relaunch
19. press A (IOS36 by default)
20. wait then press 1
21. select "Restore IOS15"
22. press A (getting IOS15 rev 523)
23. press A to install (Installing.... done)
24. press A to exit
there you go, you did it! move on to the next step.
Tutorial by Oops.
IOS STUB 249
After many tests by our friend Mamule![]()
it has been proven that this step is optional.
so next step...Spoiler
D - Deleting ios 249 (stub)
an IOS STUB: it's an empty ios created by NINTENDO to prevent the installation of custom IOS.
The software by Tona modified by Redsquirell
AnyTitleDeleter mod6b
Warning, very dangerous software!
Advice: take it slow, take your time, deleting a useful IOS could brick
your wii. Only delete the ios 249
It's very important to prepare your SD card in advance.
the wii must be connected to the internet.
1 - Now you're going to launch "AnyTitleDeleter" in Homebrew channel
Select theios36 then confirm with "A".
2 - Select the "System Titles" menu and confirm with "A"
(errors -1017 and -116 may appear, they have no impact,
just press "A" to skip past them).
3 - Find IOS249 in the list and press "A" to delete it
then again "A" to confirm the deletion.
4 - Now that you've deleted IOS 249
press the "HOME" button on the controller.
so that the Wii restarts into the Homebrew Channel.
Now move on to the next step
directly without leaving the homebrew channel:
Installing cios 249 rev17
Cios rev 17 by Waninkoko
*if you already had cios249 rev14 installed don't delete it, just do another installation,
the cios will be automatically replaced by rev17 (overwritten).
3- Installing Cios 249 rev 17
(mandatory for Wiiflow ... and many hacks...)
rev 17 is compatible with Neogamma... (well)
* Installation without internet:
Place the IOS38-64-v3867.wad file at the root of your SD
using the wii remote's arrows select "Wad Installation" then A.
(.wad included in the hackwii 4.2 pack)
then choose to install it withIOS36
Then confirm with "A", the installation starts... the wii's light comes on and a 'rock' melody plays!
* Installation with internet: choose "internet installation" then confirm with A
the installation starts with a nice blue light on the wii! etc...
at the end you'll get a [SUCCESS] message!
there you go, you did it![]()
Press any button... to exit.
Warning:
- The D3/D2nothing (new wii drive) makes installing IOS difficult. If your Wiimote freezes during the rev17 installation, it's because either ios15 or ios36 wasn't installed properly. Start over from step 2-A.
WARNING
If you get this image...
it means you missed the Flash of your WIISpoiler
Image unavailable (removed by its host)
Or that you need to stop the DRUGS!!
PS: thanks Shunite for this joke!
[align=center]IOS STUB 222/223[/align]
After many tests by our friend Mamule
it has been proven that this step is optional.
so next step...Spoiler
4 - Deleting Cios HERMES STUB.
Warning, very dangerous software!
Advice: take it slow, take your time, deleting a useful IOS could brick
your wii. Only delete the IOS 222 and 223
It's very important to prepare your SD card in advance.
the wii must be connected to the internet.
A - Now you're going to launch "AnyTitleDeleter" in Homebrew channel
Select theios36 then confirm with "A".
B - Select the "System Titles" menu and confirm with "A"
(errors -1017 and -116 may appear, they have no impact,
just press "A" to skip past them).
C - Find IOS222 in the list and press "A" to delete it
then again "A" to confirm the deletion.
D - Find IOS223 in the list and press "A" to delete it
then again "A" to confirm the deletion.
E - Now that you've deleted IOS 222 and 223
press the "HOME" button on the controller.
so that the Wii restarts into the Homebrew Channel.
F - Now move on to the next step
directly without leaving the Homebrews Channel:
Cios installer v4 by Hermes!
Cios Hermes
5 - Installing Cios 222, 202 and 223 by HERMES
- to play video dvds on wii. (202)
- to play games that don't work with Cios 249. (222 and 223)
GAMES with accessories like guitar, mic, drums etc...
Use the Cios installer v4 by Hermes
do the installation with IOS 249
Spoiler
Then launch hermes's installer: cIOS 222 installer via the Homebrew Channel.
Image unavailable (removed by its host)
Choose ios 249 for the cIOS installation
Image unavailable (removed by its host)
You'll arrive at the cIOS 222, 223, 202 installation menu.
Image unavailable (removed by its host)
Image unavailable (removed by its host)
* 222 as IOS38 merged with ios 37,
* 223 as IOS38,
* 202 as IOS38 merged with IOS60
Confirm the installation with the wiimote's A button, the installation of the chosen cIOS starts and if all goes well you should get this result at the end: "DONE".
Image unavailable (removed by its host)
Repeat the operation for each cIOS (222, 223, 202)
there you go, your cIOS are perfectly installed.
Tutorial and files by barman47
Patch ios70
5- It seems a new problem has appeared with the latest consoles on 4.2,
which prevents installing preloader and other priiloader etc...
To fix this and avoid this error we're going to patch ios70
(used by the preloader on 4.2)
A) Get Pimp My Wii v1.32
B) Install it in the apps folder of the SD
SD: apps/pimpmywii/boot.dol (included in the hackwii pack)
C) Launch PimpMyWii v1.32 from the Homebrew Channel
D) Use the Manual Installation option
E) Accept the network initialization
F) There follows a list of all the ios with the possible modifications to make.
By default, Installation is set to No, so that if you press A,
you move on to the next Ios without anything being installed.
G) Skip all the Ios until you get to ios 70, where you'll need to set installation to Yes,
and ES_Identifier to Yes as well, the rest must stay on No.
Then press A.
H) Skip all the other Ios, the installation of the patched ios 70 with ES_Identifier starts.
When it's finished, exit.
Tutorial by Pando.
Priiloader
*if you already have preloader you can update to priiloader rev81 fr
(thanks to safirion for translating it)
Warning: no DVD IN THE WII and DISABLE all the system's hacks.ini.
5- Installing Priiloader rev81 + hacks.ini in FR
HACKS.INI ONLY FOR 4.2E
To avoid updates via DVD etc..
To install, PRESS "+" on the wii remote.
To launch the Priiloader menu press the "RESET" button and start the WII.
Spoiler
video by jiiwah...
don't pay attention to the last FILES installation...
for the curious ones, he's installing a boot.dol forwarder so the wii starts directly into WIIFLOW.
What the Hacks mean in the 4.2E's hacks.ini file
Warning, I recommend not enabling a Hack without knowing what it corresponds to.
your priiloader launches when the wii starts up? that's normal ...Spoiler
Click on "System Menu Hack" and enable/disable whatever you want....
don't forget to save your changes.
[Disable HAXX, DVDX, RZDx checks]
[Block game updates]
*avoid the update via DVD.
[Disable anti-copy protection]
[Move the disc channel]
*lets you move the disc channel.
[Disable background music]
[No system menu sound at all]
[Recovery mode (RIGHT on GC pad in port 4)]
[Standard recovery mode]
[No diagnostic disc check]
[Disable the health warning]
[Reload IOS249]
*to be avoided
[Disable GC game region]
[Disable channel region]
[Black screen when loading the system menu!]There are other protections besides preloader..., priiloader, startpatch...Spoiler
to fix that go to the "settings" menu
then set the options:
"Autoboot": to "system menu"
as well as
"return to": to "system menu"
save and quit!
To go back to the Priiloader afterwards,
Turn on the console while pressing RESET!!! there you go
but not knowing this software, I won't talk about it.
you can install whichever one you want as long as the program and the hacks.ini are for 4.2E
** preloader, priiloader and starpatch are incompatible with each other **
[align=center]DARKCORP*[/align]
*Ciospack is now called Darkcorp. (long live dark)
IF YOU HAVE A CHIP = NO DARKCORP
What's it for?
darkcorp lets you launch backups (burned dvd) of your games directly from the disc channel as if it was an original.
Warning, check your wii serial number and do the test to find out
if your wii drive is compatible.
*Where is the serial number located?
If the drive is GC2-D3, avoid the installation because it could cause reading problems or other issues,
so recent black or white wii, forget it!!!
If in doubt, do the TEST HERE
thanks to Jiiwah and Oops.
If the test is successful you can launch your Backups (burned games) directly from the disc channel thanks to DARKCORP.
for the installation, a very very detailed tutorial by Baordeur.
DARKCORP
Advice
you're now in 4.2E softmod which lets you run...Spoiler
From now on, you can congratulate yourself!![]()
you've completely finished Hacking your wii.
now you can breathe because the best is yet to come.
you can post on the forum that you succeeded.
![]()
![]()
![]()
WARNING: My last piece of advice is avoid any future update
**For wiis NOT connected to the internet:
If you decide to connect it, Nintendo will necessarily offer you an update!
simply refuse!
**for wiis connected to the internet:
(Nintendo sometimes sends you a message to encourage you to update your wii
via the internet, simply refuse and delete this message, you never know with your kids etc...).![]()
Also avoid any Downgrade you don't master (brick),
Never Format otherwise Brick.
AND one last thing, keep your NAND safe, make a copy on your computer...
[align=center]WIIFLOW[/align]
But everyone's talking about wiiflow... but what is it?
a video to whet your appetite...
Spoiler
WIIFLOW STARNIGHT
Created by Shunite... Oops... and Jiiwah from the forum!
I had great pleasure being a Tester on this theme!
Wiiflow tutorial by Oops!
For the continuation of Wiiflow 1.1 it's here... Tutorial by Jiiwah!
Question:
If I understood correctly, no non-original games can be read from the DVD drive,
but launching non-original games copied by a PC onto a Hard Drive is possible or not?
Yes, it's possible to transfer your "iso games" directly from the PC to a hard drive
with the software "WBFS Manager", thanks to this free software you can use everything needed to format and transfer your games onto a H.D.D.
however you'll necessarily need a compatible hard drive
I recommend getting a 2.5" hard drive (self-powered).
To understand how to perfectly use WBFS Manager,
Formatting your hard drive, installing games etc...
watch Pocchami's tutorials!!!
WBFS Manager 1 and WBFS Manager 2
with that you have no more excuses!
Bonus Forwarder channel[align=center]Darkmenu 4.2E Theme[/align]Spoiler
Image unavailable (removed by its host) is your wii desktop empty?
fill it up with the wadmanager software and .wad channels as forwarders
(which use the files present on the SD card)
to use it create a "wad" folder at the root of the SD such as
SD: /wad/channelname.wad
and wadmanager's boot.dol such as
SD: /apps/wadmanager/boot.dol
then launch the Homebrew Channel and launch the Wadmanager software.
to install a channel press "+" on the remote then "A" to confirm.
wait for the writing to finish... then "HOME" to go back to the Homebrew channel.
to delete a channel press "-" on the remote then "A" to confirm.
wait for the writing to finish... then "HOME" to go back to the Homebrew channel.
to cancel just press B.
Channel pack: Wii Channels by Baordeur.
Pack of USB loader Channels by Jiiwah[align=center]ISO Forwarder[/align]Spoiler
to get this result we're going to use the files already present on the memory card.
Warning it's recommended to have bootmii in boot2 to do this tutorial,
because it's not without risk.
1- launch the homebrew channel
2- launch the homebrew mymenuify
3- the software asks you for the file, it's located in the "csm" folder at the root of the card
4- press "A" to confirm
5- select the file DarkWii42e * (tested and compiled by murigny64 )
there are 3 different versions for you to test! if someone could give me some screenshots that would be cool!
6- press "A" to confirm.
7- afterwards EXIT!
8- once on the Homebrew channel press "HOME"
9- then turn off the wii. (reloading the system menu leads to a brick)
10- and restart and admire the result....![]()
11- to go back to the original the file is sysmenu4.2e.app
*This file is only for 4.2E
file tested by Clioman.
Spoiler
Image unavailable (removed by its host)
Would you like to launch the homebrew channel, a homebrew, a WiiWare
or a Virtual Console from your USB Loader?? (wiiflow or other...)
It's now possible!!
How does it work??
You need to inject the homebrew's dol (or a forwarder) into an ISO.
So here's a centralization of ISOs
Tutorial by Jiiwah.
You succeeded, don't hesitate to make a DONATION to the Tgames forum
so this forum can keep going! HERE (by SMS or PAYPAL)
Thanks again
Oops for your help making the tutorial and your files!
as well as to corenting.
well then, see ya (if you succeeded with my tutorial, say so!)
ps: I'll keep completing this Tutorial to make it as complete as possible.
darkscad wrote:![]()
[align=center]Ce Tuto est aussi bien pour une wii 4.2E Noire que pour une Blanche.[/align][/color]
Disclaimer :
Attention : cela peut être dangereux pour votre WII tout ce que vous faite
ni moi ni l'administrateur du forum et toute personne du forum TGAMES
ne seront responsable de ce que vous faites.
A faire si vous n'avez pas 2 mains gauches mais un cerveau qui marche !!!
Vous avez succombé a NEW SUPER MARIO BROS WII,
ou vous avez succombé à la mise a jour par internet, votre doigt a glissé mettant "je suis d'accord" pour la faire...
avant de Hacker votre wii vous êtes en maintenant en 4.2E
Pas de panique le Softmod pour 4.2E existe en effectuant des manipulations simples.
HACK WII 4.2
Préparation SD
1- Commencement du HACKPack complet de HACK WII 4.2E v.6Spoiler
Formater votre carte (conseil minimum 1Go) en FAT !
éviter les SDHC.
Télécharger le pack 4.2e (écrire un message pour libérer le message)
Message caché
[align=center]Installation chaine Homebrews[/align]
Spoiler
Maintenant que vous avez bien préparé votre SD
Allez sur l'icône de la carte SD
Vous obtiendrez cette image.Validez avec A la proposition OUI.
Validez avec "1" de la télécommande wii.
Vous aurez 3 choix :
- Installation homebrew channel
- Installation DVDX
- Installation BOOTMII en BOOT2 comme sur l'image ou en IOS (dans ce cas la ligne sera violette)
Installez les 3 choix.
Appuyez sur [continue] => [install the homebrew channel] => [yes,continue] => [continue]
Faites de même avec DVDX.
Et surtout Bootmii selon le choix proposé.(boot2 ou ios)
N'oubliez surtout pas de créer les fichiers bootmii sur la carte SD.
PS: il est inutile de mettre Bootmii en ios si vous l'avez installé en boot2 comme sur la vidéo.
Tuto de webs modifié par mes soins
[align=center]BOOTMII ?[/align]
[align=center]sauvegarde Nand[/align]
Attention ImportantSpoiler
Maintenant nous allons effectuer une étape crucial, pour se protéger des mauvaise surprises.(brick)
Si vous êtes à cette étape c'est que vous avez installé Bootmii en boot2 ou en ios.
Nous allons ensemble faire un DUMP (sauvegarde) de la Nand.
La NAND qu'est-ce que c'est ? ?
c'est la mémoire interne de la wii elle contient toute les informations de votre wii,
tel que les sauvegardes de vos jeux, les jeux VC (virtual console) et ceux de Wiiware ainsi que tout les IOS ou Cios intégré au système.
De manière imagé on pourrait comparer la sauvegarde de la Nand à une TIMECAPSULE créer a un instant T.
En cas de souci (brick), on réinjecte la Nand via bootmii est nous nous retrouvons a cette instant T.
Donc les sauvegarde et autre... seront celle de l'instant de LA SAUVEGARDE.
Pour cela regarder le tuto illustré de Xav91
Effectuer un Dump (sauvegarde) de votre NAND de console avec Bootmii.
Informations importantes
* Le boot2 étant impossible à installer sur les nouvelles Wii... (blanche et noire)
* Laissez 528mo minimum de libre sur la carte SD.
* Je conseillerai une SD de 1go ou 2go maximum non-SDHC formatée en FAT pour effectuer le dump de la nand.
*SD compatible BOOTMIISpoiler
La wiimote n'est pas reconnue dans le menu BootMII
Pour naviguer dans le menu BootMII à l'aide des boutons en façade
- Bouton Power pour se déplacer (vers la droite)
- Bouton Reset pour valider
ou avec la manette Gamecube
- pad directionnel pour les déplacements
- A pour valider
Pour commencer allez sur cette icône avec POWER puis validé avec RESET.
*sauvegarde de la NAND*
validez encore sur cette icône avec RESET.
vous allez arriver sur cette image.(le fond doit être vert, si il est rouge vous êtes en mode Restauration)
vous êtes désormais prêt à effectuer la copie de la NAND.
Presser la touche RESET.
Copie de la NAND sur la SD (il est normal de trouver des Bad blocks)
vérification de la NAND.
Contrôle OK, appuyez sur n'importe quel bouton pour sortir.
Bravo vous avez réussi
effectuez une sauvegarde du fichier NAND et du dossier Bootmii ainsi que du fichier .key
Gardez bien précieusement ces fichiers dans votre Ordinateur.
Elle servira si la WII brick un jour !
Je conseille de refaire une sauvegarde à la fin du tuto !
Comme ça vous aurez 2 Nands. (avant et après Hack!)
tuto de xav91
[align=center]BUG TRUCHA[/align][/color]
2 - Restauration du Bug Trucha
Downgradez avec Trucha Bug Restorer 1.12
La wii doit être connecter sur internet.
sinon plus rapide et plus sur pour ceux qui aurais des problèmes de connexion...
il vous faut a la racine de la SD les fichiers suivant:
(disponible sur le forum)
Attention, lors du patch de l'ios 36 la troisième option (patch nand permission)
doit être activée pour pouvoir continuer le tuto.
* IOS15-64-v257.wad
* IOS15-64-v266.wad
* IOS15-64-v523.wad
* IOS36-64-v3094.wad
* IOS36-64-v3351.wad
Autre Tuto de xav91.Spoiler
1. lancer Trucha Bug Restorer 1.12 mod avec la chaine homebrews.
2. appuyez sur B
3. attendre puis appuyer sur 1
4. Sélectionnez "Downgrade IOS15"
5. appuyez sur A (getting IOS15 rev 523)
6. appuyez sur A (getting IOS15 rev 257)
7. appuyez sur A pour step 1
8. appuyez sur A pour step 2
9. appuyez sur A pour sortir
10. relancez
11. sélectionnez l'ios15 avec gauche sur la wiimote puis appuyer sur A
12. attendre puis appuyer sur 1
13. sélectionnez "IOS36 menu"
14. cochez toutes possibilité sur YES
donc la nouvelle option ES verify
(non disponible sur la photo de nouvelle photos bientôt )
ATTENTION n'oubliez pas cette étape du tuto...
vérifiez bien que vous avez coché toute les possibilité sur YES avec la croix directionnelle de la télécommande wii.
sinon vous ne pourrez pas installé le cios 249
et donc continuer le tuto !
15. appuyez sur A (getting rev 3351)
16. appuyez sur A pour installer (Installing.... done)
17. appuyez sur A pour sortir
18. relancez
19. appuyez sur A (IOS36 par défaut)
20. attendre puis appuyer sur 1
21. sélectionnez "Restore IOS15"
22. appuyez sur A (getting IOS15 rev 523)
23. appuyez sur A pour installer (Installing.... done)
24. appuyez sur A pour sortir
voila vous avez réussi ! passez a l'étape suivante.
Tuto de Oops.
IOS STUB 249
Après de nombreux tests de notre ami Mamule![]()
nous a prouvé que cette étape était facultative.
donc étape suivante...Spoiler
D - Effacement de l'ios 249 (stub)
un IOS STUB : C'est un ios vide créé par NINTENDO pour éviter l'installation de custom IOS.
Le logiciel de Tona modifié par Redsquirell
AnyTitleDeleter mod6b
Attention logiciel très dangereux !
Conseil : Allez y doucement, prenez votre temps, supprimez un IOS utile pourrais bricker
votre wii. Supprimez uniquement l' ios 249
Il est très important de préparer sa carte SD a l'avance.
la wii doit être connectée à internet.
1 - Maintenant vous allez lancer "AnyTitleDeleter" dans Homebrew channel
Sélectionnez l'ios36 puis validez avec "A".
2 - Sélectionnez le menu "System Titles" et validez avec "A"
(des erreurs -1017 et -116 peuvent apparaitre, elle sont sans incidence,
appuyez simplement sur "A" pour les passer).
3 - Trouvez l'IOS249 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour valider la suppression.
4 - Maintenant que vous avez supprimé l'IOS 249
appuyez sur le bouton "HOME" de la manette.
pour que la Wii redémarre sous la Chaine Homebrew.
Maintenant passez a l'étape suivante
directement sans quitter la chaine homebrew :
Installation du cios 249 rev17
Cios rev 17 de Waninkoko
*si vous l'avais déjà installé le cios249 rev14 ne l'effacez pas faite simplement une autre installation,
le cios sera remplacé automatiquement par le rev17.(écrasé)
3- Installation du Cios 249 rev 17
(obligatoire pour Wiiflow ... et de nombreux hacks...)
la rev 17 est compatible avec Neogamma... (enfin)
* Installation sans internet:
Placez le fichier IOS38-64-v3867.wad à la racine de votre SD
avec les flèches de la Télécommande wii mettre "Wad Installation" puis A.
(.wad fourni dans le pack hackwii 4.2)
puis choisir de l'installer avec l'IOS36
Puis validez avec "A", l'installation ce lance... la lumière de la wii s'allume et une mélodie 'rock' est lancée !
* Installation avec internet: choisir "internet installation" puis valider avec A
l'installation démarre avec une jolie lumière bleu sur la wii ! ect...
a la fin vous aurais un message [SUCCES] !
voila vous avez réussi![]()
Appuyé sur n'importe quelle touche... pour quitter.
Attention:
- La D3/D2nothing (nouveau lecteur wii) rend l'installation d'IOS difficile. Si votre Wiimote se bloque à l'installation de la rev17, c'est que soit l'ios15 soit l'ios36 c'est mal installé. Recommencez à l'étape 2-A.
ATTENTION
Si vous avez cette image...
c'est que vous avez raté le Flash de votre WIISpoiler
Ou que vous devez arrêter la DROGUE !!
PS : merci Shunite pour ce délire !
[align=center]IOS STUB 222/223[/align]
Après de nombreux tests de notre ami Mamule
nous a prouvé que cette étape était facultative.
donc étape suivante...Spoiler
4 - Effacement Cios HERMES STUB.
Attention logiciel très dangereux !
Conseil : Allez y doucement, prenez votre temps, supprimez un IOS utile pourrais bricker
votre wii.Supprimez uniquement l' IOS 222 et 223
Il est très important de préparer sa carte SD a l'avance.
la wii doit être connecter à internet.
A - Maintenant vous allez lancer "AnyTitleDeleter" dans Homebrew channel
Sélectionnez l'ios36 puis validez avec "A".
B - Sélectionnez le menu "System Titles" et valider avec "A"
(des erreurs -1017 et -116 peuvent apparaitre, elle sont sans incidence,
appuyez simplement sur "A" pour les passer).
C - Trouvez l'IOS222 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour validé la suppression.
D - Trouvez l'IOS223 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour valider la suppression.
E - Maintenant que vous avez supprimés les IOS 222 et 223
appuyez sur le bouton "HOME" de la manette.
pour que la Wii redémarre sous la Chaine Homebrew.
F - Maintenant passer a l'étape suivante
directement sans quitter la Chaine Homebrews :
Cios installer v4 de Hermes !
Cios Hermes
5 - Installation des Cios 222, 202 et 223 de HERMES
- pour lire les dvd videos sur wii. (202)
- pour jouer a des jeux qui ne passe pas avec le Cios 249. (222 et 223)
JEUX avec accessoires guitare micro batterie etc...
Utilisez le Cios installer v4 de Hermes
effectuez l'installation avec IOS 249
Spoiler
Puis lancer l'installer d'hermes: cIOS 222 installer par la Chaine Homebrew.
Choisir l'ios 249 pour l'installation du cIOS
Vous arrivez dans le menu d'installation des cIOS 222, 223, 202.
* le 222 en IOS38 merged with ios 37,
* le 223 en IOS38,
* le 202 en IOS38 merged with IOS60
Validez l'installation avec le bouton A de la wiimote, l'installation du cIOS choisie se lance et si tout est bon vous devriez obtenir ce résultat pour finir "DONE".
Renouvelez l'opération pour chaque cIOS (222, 223, 202)
voila vos cIOS sont parfaitement installés.
Tuto et fichiers de barman47
Patch ios70
5- Il semblerai qu'un nouveau problème soit apparu avec les dernières console en 4.2,
qui empêche l'installation du preloader et autres priiloader etc...
Pour remédier à cela et éviter cette erreur nous allons patché ios70
(utilisé par le préloader en 4.2)
A) Récuperez Pimp My Wii v1.32
B) L'installer dans le dossier apps de la SD
SD: apps/pimpmywii/boot.dol (fourni dans le pack hackwii)
C) Lancez PimpMyWii v1.32 depuis la Homebrew Channel
D) Utiliser l'option Installation Manuelle
E) Accepter l'initialisation réseau
F) S'en suit une liste de tous les ios avec les éventuels modifications à apporter.
De base, Installation est sur Non, de tel sorte que si on presse A,
on passe a l'Ios suivant sans que rien ne soit installé.
G) Passez tous les Ios jusqu'à arriver a l'ios 70, ou alors il faudra passer installation sur Oui,
et ES_Identifier sur Oui également, le reste doit être sur Non.
Puis presser A.
H) Passez tous les autres Ios, l'installation de l'ios 70 patché avec l'ES_Identifier se lance.
Quand c'est terminé, sortir.
Tuto de Pando.
Priiloader
*si vous avez déjà le preloader vous pouvez mettre a jour en priiloader rev81 fr
(merci a safirion pour la traduction de celui-ci)
Attention: pas de DVD DANS LA WII et DÉSACTIVER tous les hacks.ini du système.
5- Installation du Priiloader rev81 + hacks.ini en FR
HACKS.INI SEULEMENT POUR 4.2E
Pour éviter les mise a jour par DVD etc..
Pour installation APPUYER sur "+" de la télécommande wii.
Pour lancer le menu du Priiloader appuyez sur le bouton "RESET" et démarrez la WII.
Spoiler
video by jiiwah...
ne faite pas attention a la dernière installation FILES...
pour les curieux il est en train d'installé un boot.dol forwarder pour que la wii demarre directement sur WIIFLOW.
Ce que signifie les Hacks. du fichier hacks.ini du 4.2E
Attention je conseille de ne pas activer un Hack sans connaitre ce à quoi il correspond.
votre priiloader ce lance au démarrage de la wii ? c'est normal ...Spoiler
Cliquer sur "System Menu Hack" et activer/désactiver ce que vous voulez....
n'oubliez pas de sauvegarder vos modifications.
[Désactiver verif. HAXX,DVDX,RZDx]
[Bloquer mises a jour des jeux]
*éviter la mise a jour par DVD.
[Désactiver la protection anti-copie]
[Déplacer la chaine disque]
*permet de déplacer la chaine disque.
[Désactiver la musique de fond]
[Pas de son du system menu du tout]
[Mode récupération (DROITE pad GC sur port 4)]
[Mode récupération standard]
[Pas de verif. disque de diagnostic]
[Désactiver l'avertissement sante]
[Recharger l'IOS249]
*à éviter
[Désactiver la region des jeux GC]
[Désactiver la region des chaines]
[Écran noir au chargement du sytem menu!]Il existe d'autre protections que le preloader..., priiloader, startpatch...Spoiler
pour remédier à cela allez dans le menu "setting"
puis mettre les options:
"Autoboot": sur "system menu"
ainsi que
"return to" : sur "system menu"
sauvegardez et quitter !
Pour retourner sur le Priiloader par la suite,
Allumez la console en appuyant sur RESET !!! voila
mais ne connaissant pas ce logiciesl, je n'en parle pas.
vous pouvez installer celui que vous voulez tant de le programme et le hacks.ini sont pour 4.2E
** le preloader, priiloader et starpatch sont incompatibles entre eux **
[align=center]DARKCORP*[/align]
*Ciospack se nomme maintenant Darkcorp. (vive les dark)
SI VOUS AVEZ UNE PUCE = PAS DE DARKCORP
A quoi sa sert ?
le darkcorp permet de lancer les backups (dvd gravé) de vos jeux directement sur la chaine disque comme si il s'agissait d'un original.
Attention vérifier votre numéro de série wii et effectuer le test pour savoir
si votre lecteur wii est compatible.
*Ou ce trouve le numero de serie ?
Si le lecteur est GC2-D3 évite l'installation car cela pourrais causé des problèmes de lectures ou autre,
donc wii récente noire ou blanche oubliez !!!
En cas de doute effectuer le TEST ICI
merci à Jiiwah et Oops.
Si le test est concluant vous pouvez lancer vos Backup (jeux gravé) directement depuis la chaine disque grâce au DARKCORP.
pour l'installation un tutoriel très très détaillée de Baordeur.
DARKCORP
Conseil
vous êtes maintenant en 4.2E softmod qui permet de lancer...Spoiler
A partir de maintenant, vous pouvez vous féliciter !![]()
vous avez terminer complètement le Hack de votre wii.
maintenant vous pouvez respirer car le meilleur est a venir.
vous pouvez écrire sur le forum que vous avez réussi.
![]()
![]()
![]()
ATTENTION : Mon dernier conseil est Éviter toute future mise a jour
**Pour les wii NON connectés a internet :
Si vous décidez de la connecter Nintendo vous proposera obligatoirement une mise a jour !
refusez simplement !
**pour les wii connectés a internet :
( Nintendo vous envoi parfois un message pour vous inciter à mettre votre wii a jour votre wii
par internet, refusez simplement et effacez ce message on sais jamais vos enfants ect...).![]()
Évitez aussi tout Downgrade que vous ne maîtriserai pas (brick),
Ne Formatez Jamais sinon Brick.
ET dernière chose gardez précieusement votre NAND faite une copie sur votre ordi...
[align=center]WIIFLOW[/align]
Mais wiiflow tout le monde en parle... mais c'est quoi ?
une vidéo pour vous donner l'eau la bouche...
Spoiler
WIIFLOW STARNIGHT
Créer par Shunite... Oops... et Jiiwah du forum !
j'ai eu grand plaisir a être Testeur sur ce thème !
Wiiflow tuto de Oops !
Pour la suite de Wiiflow 1.1 c'est ici... Tuto de Jiiwah !
Question :
Si j'ai bien compris pas de lecture possible de jeux non originaux depuis le lecteur DVD,
mais lancer des jeux non originaux copiés par un PC sur un Disque Dur c'est possible ou pas?
Oui, il est possible de faire un transfère de ses " jeux.ISO " directement du PC vers un disque dur
avec le logiciel "WBFS Manager", grâce à ce logiciel gratuit tu peut utiliser tout ce qu'il faut pour formater et transférer ses jeux sur H.D.D.
par contre il faudra obligatoirement un disque dur compatible
je conseille de prendre un disque dur 2.5 (auto-alimenté).
Pour comprendre comment utiliser WBFS Manager parfaitement,
Formatez votre disque dur, Installation de jeux ect...
regardez les tutoriels de Pocchami !!!
WBFS Manager 1 et WBFS Manager 2
avec ça vous n'avez plus d'excuses !
Bonus Chaine forwarder[align=center]Thème Darkmenu 4.2E[/align]Spoiler
votre bureau wii est vide ?
remplissez le avec le logiciel wadmanager et des chaines .wad en forwarder
(qui utilise les fichier présent sur la carte SD)
pour sont utilisation créez un dossier "wad" à la racine de la SD tel que
SD: /wad/nomdelachaine.wad
et le boot.dol de wadmanager tel que
SD: /apps/wadmanager/boot.dol
puis lancez la Homebrew Channel et lancer le logiciel Wadmanager.
pour l'installation d'une chaine "+" de la télécommande puis "A" pour valider.
attendez la fin des écritures... puis "HOME" pour revenir a la Homebrew channel.
pour effacer une chaine "-" de la télécommande puis "A" pour valider.
attendez la fin des écritures... puis "HOME" pour revenir a la Homebrew channel.
pour annuler appuyez simplement B.
Regroupement de chaine : Chaines wii by Baordeur.
Regroupement de Chaines usb loader by Jiiwah[align=center]ISO Forwarder[/align]Spoiler
pour obtenir ce résultat nous allons utiliser les fichiers déjà présent sur la carte mémoire.
Attention il est conseillé d'avoir bootmii en boot2 pour effectuer ce tuto,
car il n'est pas sans risque.
1- lancer la chaine hombrew
2- lancer le hombrew mymenuify
3- le logiciel vous demande le fichier, il se trouve dans le dossier "csm" à la racine de la carte
4- appuyez sur "A" pour valider
5- sélectionnez le fichier DarkWii42e * (testé et compilé par murigny64 )
il y a 3 version différente à vous de tester ! si l'on peut me donner des screenshot ça serais cool !
6- appuyez sur "A" pour valider.
7- après EXIT !
8- une fois sur la chaine Homebrew appuyez sur "HOME"
9- puis éteindre la wii. (recharger le systeme menu mène a un brick)
10- et redémarrez et admirez le résultat....![]()
11- pour revenir a l'original le fichier est le sysmenu4.2e.app
*Ce fichier n'est que pour 4.2E
fichier tester par Clioman.
Spoiler
Vous aimeriez lancer l'homebrew channel, un homebrew, un WiiWare
ou un Virtual Console à partir de votre USB Loader ?? (wiiflow ou autre...)
C'est maintenant possible !!
Comment ça fonctionne ??
Il faut injecter le dol de l'homebrew (ou un forwarder) dans un ISO.
Voici donc une centralisation d'ISO
Tuto de Jiiwah.
Vous avez réussi, n'hésitez pas à faire un DON au forum Tgames
pour que ce forum continu ! ICI (par SMS ou PAYPAL)
Encore merci
Oops pour ton aide à la confection du tuto et tes fichiers !
ainsi que a corenting.
voilà a+ ( si vous avez réussi avec mon tuto dite le ! )
ps: je compléterais ce Tuto de manière a ce qu'il soit le plus complet possible.
-
fredericasse
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Sat 29 May 2010 15:34
-
araboandallous
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sat 29 May 2010 18:06
-
slimcch
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 29 May 2010 18:40
-
erik54
- Novice
- Members
- Posts: 41
- Joined: Fri 29 Jan 2010 14:59
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: Aucun
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
OrganiX
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Sat 29 May 2010 19:14
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
daju
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 29 May 2010 23:03
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
Thanks for this excellent tutorial
Merci pour cet excellent tuto
-
FinalShadow
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Mon 17 May 2010 19:48
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
Nazrulhz
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 30 May 2010 10:18
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
YAND3L
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 30 May 2010 10:33
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
mourad73
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Mon 25 Jan 2010 01:16
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
samtaz007
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 30 May 2010 13:08
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
PIJERO
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 30 May 2010 13:09
-
AstroMan
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 30 May 2010 13:41
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
clowny76
- Nouvel arrivant
- Members
- Posts: 7
- Joined: Sun 30 Aug 2009 09:59
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
Gamer_fr2001
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 30 May 2010 18:41
-
59jojo
- Nouvel arrivant
- Members
- Posts: 6
- Joined: Sun 9 Aug 2009 09:43
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
jean-sebou
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Mon 31 May 2010 11:29
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
-
PETAOUCHNOK
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Mon 31 May 2010 13:30
![[TUTO] HACK Wii 4.2E](https://defaultprime.com/wp-content/uploads/2009/03/hands-on-wii-system-menu-40-20090325040020889_640w.jpg)
![[TUTO] HACK Wii 4.2E](https://image.blog.livedoor.jp/r35psp/imgs/9/4/949fca8a.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3010_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i82.servimg.com/u/f82/14/02/59/22/2009-080.png)
![[TUTO] HACK Wii 4.2E](https://i82.servimg.com/u/f82/14/02/59/22/2009-082.png)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3210_r11.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3310_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3410_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3510_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3610_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/2009-019.png)
![[TUTO] HACK Wii 4.2E](https://www.wiidrives.com/images/serial_number.jpg)








