[TUTORIAL] HACK Wii 4.2E
-
jay_K
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 21 Mar 2010 12:30
-
sensi2a
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 21 Mar 2010 12:40
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
THANKS for the tutorial!
MERCI pour le tuto !
-
grutz
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 21 Mar 2010 13:18
-
Lexx97
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 21 Mar 2010 13:20
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
Hi,
Thanks for this well detailed post!!
Lexx
Thanks for this well detailed post!!
Lexx
Salut,
Merci pour ce post bien détaillé !!
Lexx
Merci pour ce post bien détaillé !!
Lexx
-
samir11
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 21 Mar 2010 13:56
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
darkscad wrote: Image unavailable (removed by its host)
[align=center]This Tutorial works just as well for a Black Wii 4.2E as for a White one.[/align][/color]
Disclaimer:
Warning: everything you do can be dangerous for your WII
neither me nor the forum administrator nor anyone from the TGAMES forum
will be responsible for what you do.
To be done if you don't have two left hands but a brain that works!!!
You gave in to NEW SUPER MARIO BROS WII,
or you gave in to the internet update, your finger slipped and pressed I agree to do it...![]()
before Hacking your wii you are now on 4.2E
No panic, the Softmod for 4.2E exists by performing simple steps.
HACK WII 4.2
SD Preparation
1- Starting the HACKComplete HACK WII 4.2E v.4 packSpoiler
Format your card (minimum 1GB recommended) in FAT!
avoid SDHC cards.
Download the 4.2e pack (write a message to unlock the message)
Hidden message
[align=center]Installing the Homebrew Channel[/align]
Spoiler
Now that you have properly prepared your SD
Go to the SD card icon
You will get this image. Confirm with A on the YES option.
Image unavailable (removed by its host)
Confirm with "1" on the wii remote.
You will have 3 choices:
- Installing the homebrew channel
- Installing DVDX
- Installing BOOTMII as BOOT2 like in the image or as IOS (in that case the line will be purple)
Image unavailable (removed by its host)
Install all 3 choices.
Appuyez sur [continue] => [install the homebrew channel] => [yes,continue] => [continue]
Do the same with DVDX.
And especially Bootmii according to the option offered.(boot2 or ios)
Above all, don't forget to create the bootmii files on the SD card.
PS: there's no point putting Bootmii as ios if you installed it as boot2 like in the video.
Tutorial by webs, modified by me
[align=center]BOOTMII?[/align]
[align=center]Nand backup[/align]
Important WarningSpoiler
Now we're going to carry out a crucial step, to protect against bad surprises.(brick)
If you're at this step it's because you installed Bootmii as boot2 or as ios.
Together we're going to make a DUMP (backup) of the Nand.
The NAND, what is it??
it's the wii's internal memory, it contains all the information of your wii,
such as your game saves, the VC (virtual console) games and the Wiiware ones as well as all the IOS or Cios built into the system.
To put it in a picture, you could compare the Nand backup to a TIMECAPSULE created at a given moment T.
In case of a problem (brick), we reinject the Nand via bootmii and we're back to that moment T.
So the saves and everything else... will be the ones from the moment of THE BACKUP.
For that, watch the illustrated tutorial by Xav91
Perform a Dump (backup) of your NAND of the console with Bootmii.
Important information
* Since boot2 is impossible to install on the new Wiis... (white and black)
* Leave at least 528mb free on the SD card.
* I would recommend a 1GB or 2GB max non-SDHC SD card formatted in FAT to perform the nand dump.
*BOOTMII-compatible SD cardSpoiler
The wiimote is not recognized in the BootMII menu
To navigate the BootMII menu using the front buttons
- Power button to move (to the right)
- Reset button to confirm
or with the Gamecube controller
- directional pad for movement
- A to confirm
To start, go to this icon with POWER then confirm with RESET.
*NAND backup*
confirm again on this icon with RESET.
you'll arrive at this image.(the background must be green, if it's red you're in Restore mode)
you are now ready to make the copy of the NAND.
Press the RESET button.
Copying the NAND to the SD (it's normal to find Bad blocks)
verification of the NAND.
Check OK, press any button to exit.
Congratulations, you succeeded
make a backup of the NAND file and the Bootmii folder as well as the .key file
Keep these files safe on your Computer.
It will be useful if the WII bricks one day!
I recommend making another backup at the end of the tutorial!
That way you'll have 2 Nands. (before and after the Hack!)
tutorial by xav91
[align=center]TRUCHA BUG[/align][/color]
2 - Restoring the Trucha Bug
Downgrade with Trucha bug restorer 1.11
The wii must be connected to the internet.
otherwise faster and safer for those who would have connection problems...
you need the following files at the root of the SD:
(available on the forum)
Warning, when patching ios 36 the third option (patch nand permission)
must be enabled to be able to continue the tutorial.
* IOS15-64-v257.wad
* IOS15-64-v266.wad
* IOS15-64-v523.wad
* IOS36-64-v3094.wad
* IOS36-64-v3351.wad
All the .wad files are available HERE
Other Tutorial by xav91.Spoiler
1. launch Trucha Bug Restorer 1.11 mod with the homebrew channel.
2. press B
3. wait then press 1
4. Select "Downgrade IOS15"
5. press A (getting IOS15 rev 523)
6. press A (getting IOS15 rev 257)
7. press A for step 1
8. press A for step 2
9. press A to exit
10. relaunch
11. select ios15 with left on the wiimote then press A
12. wait then press 1
13. select "IOS36 menu"
14. check all options to YES
WARNING don't forget this step of the tutorial...
make sure you've checked all the options to YES with the directional pad of the wii remote.
otherwise you won't be able to install cios 249
and therefore continue the tutorial!
15. press A (getting rev 3351)
16. press A to install (Installing.... done)
17. press A to exit
18. relaunch
19. press A (IOS36 by default)
20. wait then press 1
21. select "Restore IOS15"
22. press A (getting IOS15 rev 523)
23. press A to install (Installing.... done)
24. press A to exit
there you go, you succeeded! move on to the next step.
Tutorial by Oops.
IOS STUB 249
D - Deleting ios 249 (stub)
an IOS STUB: it's an empty ios created by NINTENDO to prevent the installation of custom IOS.
Software by Tona modified by Redsquirell
AnyTitleDeleter mod6b
Warning, very dangerous software!
Advice: go easy, take your time, deleting a useful IOS could brick
your wii. Only delete the ios 249
It's very important to prepare your SD card in advance.
Spoiler
the wii must be connected to the internet.
1 - Now you're going to launch "AnyTitleDeleter" in the Homebrew channel
Select theios36 then confirm with "A".
2 - Select the "System Titles" menu and confirm with "A"
(errors -1017 and -116 may appear, they have no impact,
just press "A" to skip them).
3 - Find IOS249 in the list and press "A" to delete it
and again on "A" to confirm the deletion.
4 - Now that you've deleted IOS 249
press the "HOME" button on the controller.
so the Wii restarts into the Homebrew Channel.
Now move on to the next step
directly without leaving the homebrew channel:
Installing cios 249 rev17
Cios rev 17 by Waninkoko
*if you had already installed cios249 rev14, don't delete it, just do another installation,
the cios will be automatically replaced by rev17.(overwritten)
3- Installing Cios 249 rev 17
(mandatory for Wiiflow... and many hacks...)
rev 17 is compatible with Neogamma... (well)
* Installation without internet:
Place the file IOS38-64-v3867.wad at the root of your SD
using the arrows on the wii Remote set to "Wad Installation" then A.
(.wad provided in the hackwii 4.2 pack)
then choose to install it with theIOS36
Then confirm with "A", the installation starts... the wii's light turns on and a 'rock' melody plays!
* Installation with internet: choose "internet installation" then confirm with A
the installation starts with a nice blue light on the wii! etc...
at the end you'll get a [SUCCESS] message!
there you go, you succeeded![]()
Press any button... to exit.
Warning:
- The D3/D2nothing (new wii drive) makes installing IOS difficult. If your Wiimote freezes during the rev17 installation, it's because either ios15 or ios36 was installed incorrectly. Start again at step 2-A.
WARNING
If you get this image...
it means you missed the Flash of your WIISpoiler
Image unavailable (removed by its host)
Or that you need to stop taking DRUGS!!
PS: thanks Shunite for this craziness!
[align=center]IOS STUB 222/223[/align]
4 - Deleting Cios HERMES STUB. (optional)
If you don't have Guitar Hero, I recommend skipping this Optional step.
Warning, very dangerous software!
Advice: go easy, take your time, deleting a useful IOS could brick
your wii. Only delete the IOS 222 and 223
It's very important to prepare your SD card in advance.Spoiler
the wii must be connected to the internet.
A - Now you're going to launch "AnyTitleDeleter" in the Homebrew channel
Select theios36 then confirm with "A".
B - Select the "System Titles" menu and confirm with "A"
(errors -1017 and -116 may appear, they have no impact,
just press "A" to skip them).
C - Find IOS222 in the list and press "A" to delete it
and again on "A" to confirm the deletion.
D - Find IOS223 in the list and press "A" to delete it
and again on "A" to confirm the deletion.
E - Now that you've deleted IOS 222 and 223
press the "HOME" button on the controller.
so the Wii restarts into the Homebrew Channel.
F - Now move on to the next step
directly without leaving the Homebrew Channel:
Cios installer v4 by Hermes!
Cios Hermes
5 - Installing Cios 222, 202 and 223 by HERMES
- to play video DVDs on wii. (202)
- to play games that don't work with Cios 249. (222 and 223)
GAMES with guitar, mic, drum accessories etc...
Use the Cios installer v4 by Hermes
perform the installation with IOS 249
without internet: Hidden message
Extract the content of the 00000001 folder to the root of the SD.
Spoiler
Then launch Hermes's installer: cIOS 222 installer through the Homebrew Channel.
Image unavailable (removed by its host)
Choose ios 249 for the cIOS installation
Image unavailable (removed by its host)
You arrive at the installation menu for cIOS 222, 223, 202.
Image unavailable (removed by its host)
Image unavailable (removed by its host)
* 222 as IOS38 merged with ios 37,
* 223 as IOS38,
* 202 as IOS38 merged with IOS60
Confirm the installation with the wiimote's A button, the installation of the chosen cIOS starts and if everything's fine you should get this result at the end "DONE".
Image unavailable (removed by its host)
Repeat the operation for each cIOS (222, 223, 202)
there you go, your cIOS are perfectly installed.
Tutorial and files by barman47
Patch ios70
5- It seems a new problem has appeared with the latest consoles on 4.2,
which prevents installing the preloader and other priiloader etc...
To fix this and avoid this error we're going to patch ios70
(used by the preloader on 4.2)
A) Get Pimp My Wii v1.32
B) Install it in the apps folder of the SD
SD: apps/pimpmywii/boot.dol (provided in the hackwii pack)
C) Launch PimpMyWii v1.32 from the Homebrew Channel
D) Use the Manual Installation option
E) Accept the network initialization
F) This is followed by a list of all the ios with any changes to make.
By default, Installation is set to No, so that if you press A,
you move to the next Ios without anything being installed.
G) Skip all the Ios until you reach ios 70, where you'll need to set Installation to Yes,
and ES_Identifier to Yes as well, the rest must be set to No.
Then press A.
H) Skip all the other Ios, the installation of ios 70 patched with ES_Identifier starts.
When it's finished, exit.
Tutorial by Pando.
Priiloader
*if you already have preloader you can update to priiloader rev46
warning: no DVD IN THE WII and DISABLE all the system's hacks.ini.
5- Installing Priiloader rev46 + hacks.ini in FR
HACKS.INI ONLY FOR 4.2E
To avoid updates via DVD etc..
To install PRESS "+" on the wii remote.
To launch the Priiloader menu press the "RESET" button and start the WII.
Spoiler
video by jiiwah...
don't pay attention to the last FILES installation...
for the curious, it's installing a boot.dol forwarder so the wii starts directly on WIIFLOW.
What the Hacks in the 4.2E hacks.ini file mean
Warning, I recommend not enabling a Hack without knowing what it corresponds to.
your priiloader starts up when the wii boots? that's normal...Spoiler
Click on "System Menu Hack" and enable/disable whatever you want....
don't forget to save your changes.
[Disable HAXX,DVDX,RZDx check]
[Block game updates]
*avoid updating via DVD.
[Disable copy protection]
[Move the disc channel]
*allows moving the disc channel.
[Disable background music]
[No system menu sound at all]
[Recovery mode (RIGHT on GC pad on port 4)]
[Standard recovery mode]
[No diagnostic disc check]
[Disable health warning]
[Reload IOS249]
*to avoid
[Disable GC games region]
[Disable channels region]
[Black screen when loading the system menu!]There are other protections besides prerloader..., priiloader, startpatch...Spoiler
to fix this go to the "setting" menu
then set the options:
"Autoboot": to "system menu"
as well as
"return to": to "system menu"
save and exit!
To go back to the Priiloader afterwards,
Turn on the console while pressing RESET!!! there you go
but not knowing this software, I won't talk about it.
you can install whichever one you want as long as the program and the hacks.ini are for 4.2E
** preloader, priiloader and starpatch are incompatible with each other **
[align=center]Ciospack[/align]
Now look at your wii serial number and run the test to find out
if your wii drive is the GC2-D3 which is unable to use Ciospack 3.5,
so for a recent black or white wii forget it!!!
Run the test HERE by Jiiwah and Oops.
otherwise you can launch your Backups (burned games) directly from the disc channel
thanks to CIOSPACK 3.5 but first, to avoid having the homebrew channel upside down
Here's a tutorial explaining how to change the IOS
used by the homebrew channel to IOS 61. This is, among other things, to keep the channel right-side up.
This tutorial is very useful for Ciospack users for example. Because you'll be able to use all of the CIOS while keeping the homebrew channel right-side up!
Tutorial by Tgames HERE
Tutorial by Baordeur HERE
Advice
you are now on 4.2E softmod which allows you to launch...Spoiler
From now on, you can congratulate yourself!![]()
you have completely finished the Hack of your wii.
now you can breathe because the best is yet to come.
you can write on the forum that you succeeded.
![]()
![]()
![]()
WARNING: My last piece of advice is Avoid any future update
**For wiis NOT connected to the internet:
If you decide to connect it, Nintendo will inevitably offer you an update!
simply refuse!
**for wiis connected to the internet:
(Nintendo sometimes sends you a message to encourage you to update your wii
over the internet, simply refuse and delete this message, you never know, your kids etc...).![]()
Also avoid any Downgrade you don't master (brick),
Never Format otherwise Brick.
AND lastly, keep your NAND safe, make a copy on your computer...
[align=center]WIIFLOW[/align]
But everyone talks about wiiflow... but what is it?
a video to make your mouth water...
Spoiler
WIIFLOW STARNIGHT
Created by Shunite... Oops... and Jiiwah from the forum!
I had great pleasure being a Tester on this theme!
Wiiflow tutorial by Oops!
For OpenWiiflow: continuation of wiiflow it's here, Tutorial by Jiiwah!
Question:
If I understood correctly, there's no way to play non-original games from the DVD drive,
but launching non-original games copied by a PC onto a Hard Drive, is that possible or not?
Yes, it's possible to transfer your "games.ISO" directly from the PC to a hard drive
with the software "WBFS Manager", thanks to this free software you can use everything you need to format and transfer your games to a H.D.D.
however you will absolutely need a compatible hard drive
I recommend getting a self-powered 2.5" hard drive.
To understand how to use WBFS Manager perfectly,
Format your hard drive, install games etc...
watch Pocchami's tutorials!!!
WBFS Manager 1 and WBFS Manager 2
with that you have no more excuses!
Bonus Forwarder channel[align=center]Darkmenu 4.2E Theme[/align]Spoiler
Image unavailable (removed by its host) is your wii desktop empty?
fill it up with the wadmanager software and .wad forwarder channels
(which use the files present on the SD card)
to use it, create a "wad" folder at the root of the SD like so
SD: /wad/channelname.wad
and wadmanager's boot.dol like so
SD: /apps/wadmanager/boot.dol
then launch the Homebrew Channel and launch the Wadmanager software.
to install a channel, "+" on the remote then "A" to confirm.
wait for the writing to finish... then "HOME" to go back to the Homebrew channel.
to delete a channel, "-" on the remote then "A" to confirm.
wait for the writing to finish... then "HOME" to go back to the Homebrew channel.
to cancel simply press B.
Channel collection: Wii channels by Baordeur.
Collection of USB loader channels by Jiiwah[align=center]ISO Forwarder[/align]Spoiler
to get this result we're going to use the files already present on the memory card.
Warning, it's recommended to have bootmii as boot2 to do this tutorial,
because it's not without risk.
1- launch the homebrew channel
2- launch the homebrew mymenuify
3- the software asks you for the file, it's located in the "csm" folder at the root of the card
4- press "A" to confirm
5- select the file DarkWii42e * (tested and compiled by murigny64 )
there are 3 different versions for you to test! if someone could give me screenshots that would be cool!
6- press "A" to confirm.
7- then EXIT!
8- once on the Homebrew channel press "HOME"
9- then turn off the wii. (reloading the system menu leads to a brick)
10- and restart and admire the result....![]()
11- to go back to the original, the file is sysmenu4.2e.app
*This file is only for 4.2E
file tested by Clioman.
Spoiler
Image unavailable (removed by its host)
Would you like to launch the homebrew channel, a homebrew, a WiiWare
or a Virtual Console game from your USB Loader?? (wiiflow or other...)
It's now possible!!
How does it work??
You need to inject the homebrew's dol (or a forwarder) into an ISO.
So here's a centralization of ISOs
Tutorial by Jiiwah.
You succeeded, don't hesitate to make a DONATION to the Tgames forum
so this forum can keep going! HERE (by SMS or PAYPAL)
Thanks again
Oops for your help making the tutorial and your files!
as well as to corenting.
there you go, see ya (if you succeeded with my tutorial let me know!)
ps: I will complete this Tutorial so that it's as complete as possible.
darkscad wrote:![]()
[align=center]Ce Tuto est aussi bien pour une wii 4.2E Noire que pour une Blanche.[/align][/color]
Disclaimer :
Attention : cela peut être dangereux pour votre WII tout ce que vous faite
ni moi ni l'administrateur du forum et toute personne du forum TGAMES
ne seront responsable de ce que vous faites.
A faire si vous n'avez pas 2 mains gauches mais un cerveau qui marche !!!
Vous avez succombé a NEW SUPER MARIO BROS WII,
ou vous avez succombé à la mise a jour par internet, votre doigt a glissé mettant je suis d'accord pour la faire...![]()
avant de Hacker votre wii vous êtes en maintenant en 4.2E
Pas de panique le Softmod pour 4.2E existe en effectuant des manipulations simples.
HACK WII 4.2
Préparation SD
1- Commencement du HACKPack complet de HACK WII 4.2E v.4Spoiler
Formater votre carte (conseil minimum 1Go) en FAT !
éviter les SDHC.
Télécharger le pack 4.2e (écrire un message pour libérer le message)
Message caché
[align=center]Installation chaine Homebrews[/align]
Spoiler
Maintenant que vous avez bien préparé votre SD
Allez sur l'icône de la carte SD
Vous obtiendrez cette image.Validez avec A la proposition OUI.
Validez avec "1" de la télécommande wii.
Vous aurez 3 choix :
- Installation homebrew channel
- Installation DVDX
- Installation BOOTMII en BOOT2 comme sur l'image ou en IOS (dans ce cas la ligne sera violette)
Installez les 3 choix.
Appuyez sur [continue] => [install the homebrew channel] => [yes,continue] => [continue]
Faites de même avec DVDX.
Et surtout Bootmii selon le choix proposé.(boot2 ou ios)
N'oubliez surtout pas de créer les fichiers bootmii sur la carte SD.
PS: il est inutile de mettre Bootmii en ios si vous l'avez installé en boot2 comme sur la vidéo.
Tuto de webs modifié par mes soins
[align=center]BOOTMII ?[/align]
[align=center]sauvegarde Nand[/align]
Attention ImportantSpoiler
Maintenant nous allons effectuer une étape crucial, pour se protéger des mauvaise surprises.(brick)
Si vous êtes à cette étape c'est que vous avez installé Bootmii en boot2 ou en ios.
Nous allons ensemble faire un DUMP (sauvegarde) de la Nand.
La NAND qu'est-ce que c'est ? ?
c'est la mémoire interne de la wii elle contient toute les informations de votre wii,
tel que les sauvegardes de vos jeux, les jeux VC (virtual console) et ceux de Wiiware ainsi que tout les IOS ou Cios intégré au système.
De manière imagé on pourrait comparer la sauvegarde de la Nand à une TIMECAPSULE créer a un instant T.
En cas de souci (brick), on réinjecte la Nand via bootmii est nous nous retrouvons a cette instant T.
Donc les sauvegarde et autre... seront celle de l'instant de LA SAUVEGARDE.
Pour cela regarder le tuto illustré de Xav91
Effectuer un Dump (sauvegarde) de votre NAND de console avec Bootmii.
Informations importantes
* Le boot2 étant impossible à installer sur les nouvelles Wii... (blanche et noire)
* Laissez 528mo minimum de libre sur la carte SD.
* Je conseillerai une SD de 1go ou 2go maximum non-SDHC formatée en FAT pour effectuer le dump de la nand.
*SD compatible BOOTMIISpoiler
La wiimote n'est pas reconnue dans le menu BootMII
Pour naviguer dans le menu BootMII à l'aide des boutons en façade
- Bouton Power pour se déplacer (vers la droite)
- Bouton Reset pour valider
ou avec la manette Gamecube
- pad directionnel pour les déplacements
- A pour valider
Pour commencer allez sur cette icône avec POWER puis validé avec RESET.
*sauvegarde de la NAND*
validez encore sur cette icône avec RESET.
vous allez arriver sur cette image.(le fond doit être vert, si il est rouge vous êtes en mode Restauration)
vous êtes désormais prêt à effectuer la copie de la NAND.
Presser la touche RESET.
Copie de la NAND sur la SD (il est normal de trouver des Bad blocks)
vérification de la NAND.
Contrôle OK, appuyez sur n'importe quel bouton pour sortir.
Bravo vous avez réussi
effectuez une sauvegarde du fichier NAND et du dossier Bootmii ainsi que du fichier .key
Gardez bien précieusement ces fichiers dans votre Ordinateur.
Elle servira si la WII brick un jour !
Je conseille de refaire une sauvegarde à la fin du tuto !
Comme ça vous aurez 2 Nands. (avant et après Hack!)
tuto de xav91
[align=center]BUG TRUCHA[/align][/color]
2 - Restauration du Bug Trucha
Downgradez avec Trucha bug restorer 1.11
La wii doit être connecter sur internet.
sinon plus rapide et plus sur pour ceux qui aurais des problèmes de connexion...
il vous faut a la racine de la SD les fichiers suivant:
(disponible sur le forum)
Attention, lors du patch de l'ios 36 la troisième option (patch nand permission)
doit être activée pour pouvoir continuer le tuto.
* IOS15-64-v257.wad
* IOS15-64-v266.wad
* IOS15-64-v523.wad
* IOS36-64-v3094.wad
* IOS36-64-v3351.wad
Tous les .wad sont disponible ICI
Autre Tuto de xav91.Spoiler
1. lancer Trucha Bug Restorer 1.11 mod avec la chaine homebrews.
2. appuyez sur B
3. attendre puis appuyer sur 1
4. Sélectionnez "Downgrade IOS15"
5. appuyez sur A (getting IOS15 rev 523)
6. appuyez sur A (getting IOS15 rev 257)
7. appuyez sur A pour step 1
8. appuyez sur A pour step 2
9. appuyez sur A pour sortir
10. relancez
11. sélectionnez l'ios15 avec gauche sur la wiimote puis appuyer sur A
12. attendre puis appuyer sur 1
13. sélectionnez "IOS36 menu"
14. cochez toutes possibilité sur YES
ATTENTION n'oubliez pas cette étape du tuto...
vérifiez bien que vous avez coché toute les possibilité sur YES avec la croix directionnelle de la télécommande wii.
sinon vous ne pourrez pas installé le cios 249
et donc continuer le tuto !
15. appuyez sur A (getting rev 3351)
16. appuyez sur A pour installer (Installing.... done)
17. appuyez sur A pour sortir
18. relancez
19. appuyez sur A (IOS36 par défaut)
20. attendre puis appuyer sur 1
21. sélectionnez "Restore IOS15"
22. appuyez sur A (getting IOS15 rev 523)
23. appuyez sur A pour installer (Installing.... done)
24. appuyez sur A pour sortir
voila vous avez réussi ! passez a l'étape suivante.
Tuto de Oops.
IOS STUB 249
D - Effacement de l'ios 249 (stub)
un IOS STUB : C'est un ios vide créé par NINTENDO pour éviter l'installation de custom IOS.
Le logiciel de Tona modifié par Redsquirell
AnyTitleDeleter mod6b
Attention logiciel très dangereux !
Conseil : Allez y doucement, prenez votre temps, supprimez un IOS utile pourrais bricker
votre wii. Supprimez uniquement l' ios 249
Il est très important de préparer sa carte SD a l'avance.
Spoiler
la wii doit être connectée à internet.
1 - Maintenant vous allez lancer "AnyTitleDeleter" dans Homebrew channel
Sélectionnez l'ios36 puis validez avec "A".
2 - Sélectionnez le menu "System Titles" et validez avec "A"
(des erreurs -1017 et -116 peuvent apparaitre, elle sont sans incidence,
appuyez simplement sur "A" pour les passer).
3 - Trouvez l'IOS249 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour valider la suppression.
4 - Maintenant que vous avez supprimé l'IOS 249
appuyez sur le bouton "HOME" de la manette.
pour que la Wii redémarre sous la Chaine Homebrew.
Maintenant passez a l'étape suivante
directement sans quitter la chaine homebrew :
Installation du cios 249 rev17
Cios rev 17 de Waninkoko
*si vous l'avais déjà installé le cios249 rev14 ne l'effacez pas faite simplement une autre installation,
le cios sera remplacé automatiquement par le rev17.(écrasé)
3- Installation du Cios 249 rev 17
(obligatoire pour Wiiflow ... et de nombreux hacks...)
la rev 17 est compatible avec Neogamma... (enfin)
* Installation sans internet:
Placez le fichier IOS38-64-v3867.wad à la racine de votre SD
avec les flèches de la Télécommande wii mettre "Wad Installation" puis A.
(.wad fourni dans le pack hackwii 4.2)
puis choisir de l'installer avec l'IOS36
Puis validez avec "A", l'installation ce lance... la lumière de la wii s'allume et une mélodie 'rock' est lancée !
* Installation avec internet: choisir "internet installation" puis valider avec A
l'installation démarre avec une jolie lumière bleu sur la wii ! ect...
a la fin vous aurais un message [SUCCES] !
voila vous avez réussi![]()
Appuyé sur n'importe quelle touche... pour quitter.
Attention:
- La D3/D2nothing (nouveau lecteur wii) rend l'installation d'IOS difficile. Si votre Wiimote se bloque à l'installation de la rev17, c'est que soit l'ios15 soit l'ios36 c'est mal installé. Recommencez à l'étape 2-A.
ATTENTION
Si vous avez cette image...
c'est que vous avez raté le Flash de votre WIISpoiler
Ou que vous devez arrêter la DROGUE !!
PS : merci Shunite pour ce délire !
[align=center]IOS STUB 222/223[/align]
4 - Effacement Cios HERMES STUB. (facultatif)
Si vous n'avez pas Guitar hero je vous conseil, de passer cette étape Facultative.
Attention logiciel très dangereux !
Conseil : Allez y doucement, prenez votre temps, supprimez un IOS utile pourrais bricker
votre wii.Supprimez uniquement l' IOS 222 et 223
Il est très important de préparer sa carte SD a l'avance.Spoiler
la wii doit être connecter à internet.
A - Maintenant vous allez lancer "AnyTitleDeleter" dans Homebrew channel
Sélectionnez l'ios36 puis validez avec "A".
B - Sélectionnez le menu "System Titles" et valider avec "A"
(des erreurs -1017 et -116 peuvent apparaitre, elle sont sans incidence,
appuyez simplement sur "A" pour les passer).
C - Trouvez l'IOS222 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour validé la suppression.
D - Trouvez l'IOS223 dans la liste et appuyez sur "A" pour le supprimer
et de nouveau sur "A" pour valider la suppression.
E - Maintenant que vous avez supprimés les IOS 222 et 223
appuyez sur le bouton "HOME" de la manette.
pour que la Wii redémarre sous la Chaine Homebrew.
F - Maintenant passer a l'étape suivante
directement sans quitter la Chaine Homebrews :
Cios installer v4 de Hermes !
Cios Hermes
5 - Installation des Cios 222, 202 et 223 de HERMES
- pour lire les dvd videos sur wii. (202)
- pour jouer a des jeux qui ne passe pas avec le Cios 249. (222 et 223)
JEUX avec accessoires guitare micro batterie etc...
Utilisez le Cios installer v4 de Hermes
effectuez l'installation avec IOS 249
sans internet : Message caché
Extraire le contenu du dossier 00000001 à la racine de la SD.
Spoiler
Puis lancer l'installer d'hermes: cIOS 222 installer par la Chaine Homebrew.
Choisir l'ios 249 pour l'installation du cIOS
Vous arrivez dans le menu d'installation des cIOS 222, 223, 202.
* le 222 en IOS38 merged with ios 37,
* le 223 en IOS38,
* le 202 en IOS38 merged with IOS60
Validez l'installation avec le bouton A de la wiimote, l'installation du cIOS choisie se lance et si tout est bon vous devriez obtenir ce résultat pour finir "DONE".
Renouvelez l'opération pour chaque cIOS (222, 223, 202)
voila vos cIOS sont parfaitement installés.
Tuto et fichiers de barman47
Patch ios70
5- Il semblerai qu'un nouveau problème soit apparu avec les dernières console en 4.2,
qui empêche l'installation du preloader et autres priiloader etc...
Pour remédier à cela et éviter cette erreur nous allons patché ios70
(utilisé par le préloader en 4.2)
A) Récuperez Pimp My Wii v1.32
B) L'installer dans le dossier apps de la SD
SD: apps/pimpmywii/boot.dol (fourni dans le pack hackwii)
C) Lancez PimpMyWii v1.32 depuis la Homebrew Channel
D) Utiliser l'option Installation Manuelle
E) Accepter l'initialisation réseau
F) S'en suit une liste de tous les ios avec les éventuels modifications à apporter.
De base, Installation est sur Non, de tel sorte que si on presse A,
on passe a l'Ios suivant sans que rien ne soit installé.
G) Passez tous les Ios jusqu'à arriver a l'ios 70, ou alors il faudra passer installation sur Oui,
et ES_Identifier sur Oui également, le reste doit être sur Non.
Puis presser A.
H) Passez tous les autres Ios, l'installation de l'ios 70 patché avec l'ES_Identifier se lance.
Quand c'est terminé, sortir.
Tuto de Pando.
Priiloader
*si vous avez déjà le preloader vous pouvez mettre a jour en priiloader rev46
attention: pas de DVD DANS LA WII et DÉSACTIVER tous les hacks.ini du système.
5- Installation du Priiloader rev46 + hacks.ini en FR
HACKS.INI SEULEMENT POUR 4.2E
Pour éviter les mise a jour par DVD etc..
Pour installation APPUYER sur "+" de la télécommande wii.
Pour lancer le menu du Priiloader appuyez sur le bouton "RESET" et démarrez la WII.
Spoiler
video by jiiwah...
ne faite pas attention a la dernière installation FILES...
pour les curieux il est en train d'installé un boot.dol forwarder pour que la wii demarre directement sur WIIFLOW.
Ce que signifie les Hacks. du fichier hacks.ini du 4.2E
Attention je conseille de ne pas activer un Hack sans connaitre ce à quoi il correspond.
votre priiloader ce lance au démarrage de la wii ? c'est normal ...Spoiler
Cliquer sur "System Menu Hack" et activer/désactiver ce que vous voulez....
n'oubliez pas de sauvegarder vos modifications.
[Désactiver verif. HAXX,DVDX,RZDx]
[Bloquer mises a jour des jeux]
*éviter la mise a jour par DVD.
[Désactiver la protection anti-copie]
[Déplacer la chaine disque]
*permet de déplacer la chaine disque.
[Désactiver la musique de fond]
[Pas de son du system menu du tout]
[Mode récupération (DROITE pad GC sur port 4)]
[Mode récupération standard]
[Pas de verif. disque de diagnostic]
[Désactiver l'avertissement sante]
[Recharger l'IOS249]
*à éviter
[Désactiver la region des jeux GC]
[Désactiver la region des chaines]
[Écran noir au chargement du sytem menu!]Il existe d'autre protections que le prerloader..., priiloader, startpatch...Spoiler
pour remédier à cela allez dans le menu "setting"
puis mettre les options:
"Autoboot": sur "system menu"
ainsi que
"return to" : sur "system menu"
sauvegardez et quitter !
Pour retourner sur le Priiloader par la suite,
Allumez la console en appuyant sur RESET !!! voila
mais ne connaissant pas ce logiciesl, je n'en parle pas.
vous pouvez installer celui que vous voulez tant de le programme et le hacks.ini sont pour 4.2E
** le preloader, priiloader et starpatch sont incompatibles entre eux **
[align=center]Ciospack[/align]
Maintenant regardez votre numéro de série wii et effectuez le test pour savoir
si votre lecteur wii est le GC2-D3 qui est dans l'impossibilité d'utilisé le Ciospack 3.5,
donc wii récente noire ou blanche oublier !!!
Effectuez le test ICI de Jiiwah et Oops.
sinon vous pouvais lancez vos Backup (jeux gravé) directement depuis la chaine disque
grâce au CIOSPACK 3.5 mais avant pour éviter d'avoir la chaine homebrew a l'envers
Voici un tutoriel vous expliquant comment changer l'IOS
utilisé par la homebrew channel par l'IOS 61. Afin, entre autre, de conserver à l'endroit la chaîne.
Ce tutoriel est très utile pour les utilisateurs de Ciospack par exemple. Car vous allez pouvoir utiliser l'intégralité des CIOS tout en concervant à l'endroit la chaîne homebrew !
Tuto de Tgames ICI
Tuto de Baordeur ICI
Conseil
vous êtes maintenant en 4.2E softmod qui permet de lancer...Spoiler
A partir de maintenant, vous pouvez vous féliciter !![]()
vous avez terminer complètement le Hack de votre wii.
maintenant vous pouvez respirer car le meilleur est a venir.
vous pouvez écrire sur le forum que vous avez réussi.
![]()
![]()
![]()
ATTENTION : Mon dernier conseil est Éviter toute future mise a jour
**Pour les wii NON connectés a internet :
Si vous décidez de la connecter Nintendo vous proposera obligatoirement une mise a jour !
refusez simplement !
**pour les wii connectés a internet :
( Nintendo vous envoi parfois un message pour vous inciter à mettre votre wii a jour votre wii
par internet, refusez simplement et effacez ce message on sais jamais vos enfants ect...).![]()
Évitez aussi tout Downgrade que vous ne maîtriserai pas (brick),
Ne Formatez Jamais sinon Brick.
ET dernière chose gardez précieusement votre NAND faite une copie sur votre ordi...
[align=center]WIIFLOW[/align]
Mais wiiflow tout le monde en parle... mais c'est quoi ?
une vidéo pour vous donner l'eau la bouche...
Spoiler
WIIFLOW STARNIGHT
Créer par Shunite... Oops... et Jiiwah du forum !
j'ai eu grand plaisir a être Testeur sur ce thème !
Wiiflow tuto de Oops !
Pour OpenWiiflow: reprise de wiiflow c'est ici Tuto de Jiiwah !
Question :
Si j'ai bien compris pas de lecture possible de jeux non originaux depuis le lecteur DVD,
mais lancer des jeux non originaux copiés par un PC sur un Disque Dur c'est possible ou pas?
Oui, il est possible de faire un transfère de ses " jeux.ISO " directement du PC vers un disque dur
avec le logiciel "WBFS Manager", grâce à ce logiciel gratuit tu peut utiliser tout ce qu'il faut pour formater et transférer ses jeux sur H.D.D.
par contre il faudra obligatoirement un disque dur compatible
je conseille de prendre un disque dur 2.5 (auto-alimenté).
Pour comprendre comment utiliser WBFS Manager parfaitement,
Formatez votre disque dur, Installation de jeux ect...
regardez les tutoriels de Pocchami !!!
WBFS Manager 1 et WBFS Manager 2
avec ça vous n'avez plus d'excuses !
Bonus Chaine forwarder[align=center]Thème Darkmenu 4.2E[/align]Spoiler
votre bureau wii est vide ?
remplissez le avec le logiciel wadmanager et des chaines .wad en forwarder
(qui utilise les fichier présent sur la carte SD)
pour sont utilisation créez un dossier "wad" à la racine de la SD tel que
SD: /wad/nomdelachaine.wad
et le boot.dol de wadmanager tel que
SD: /apps/wadmanager/boot.dol
puis lancez la Homebrew Channel et lancer le logiciel Wadmanager.
pour l'installation d'une chaine "+" de la télécommande puis "A" pour valider.
attendez la fin des écritures... puis "HOME" pour revenir a la Homebrew channel.
pour effacer une chaine "-" de la télécommande puis "A" pour valider.
attendez la fin des écritures... puis "HOME" pour revenir a la Homebrew channel.
pour annuler appuyez simplement B.
Regroupement de chaine : Chaines wii by Baordeur.
Regroupement de Chaines usb loader by Jiiwah[align=center]ISO Forwarder[/align]Spoiler
pour obtenir ce résultat nous allons utiliser les fichiers déjà présent sur la carte mémoire.
Attention il est conseillé d'avoir bootmii en boot2 pour effectuer ce tuto,
car il n'est pas sans risque.
1- lancer la chaine hombrew
2- lancer le hombrew mymenuify
3- le logiciel vous demande le fichier, il se trouve dans le dossier "csm" à la racine de la carte
4- appuyez sur "A" pour valider
5- sélectionnez le fichier DarkWii42e * (testé et compilé par murigny64 )
il y a 3 version différente à vous de tester ! si l'on peut me donner des screenshot ça serais cool !
6- appuyez sur "A" pour valider.
7- après EXIT !
8- une fois sur la chaine Homebrew appuyez sur "HOME"
9- puis éteindre la wii. (recharger le systeme menu mène a un brick)
10- et redémarrez et admirez le résultat....![]()
11- pour revenir a l'original le fichier est le sysmenu4.2e.app
*Ce fichier n'est que pour 4.2E
fichier tester par Clioman.
Spoiler
Vous aimeriez lancer l'homebrew channel, un homebrew, un WiiWare
ou un Virtual Console à partir de votre USB Loader ?? (wiiflow ou autre...)
C'est maintenant possible !!
Comment ça fonctionne ??
Il faut injecter le dol de l'homebrew (ou un forwarder) dans un ISO.
Voici donc une centralisation d'ISO
Tuto de Jiiwah.
Vous avez réussi, n'hésitez pas à faire un DON au forum Tgames
pour que ce forum continu ! ICI (par SMS ou PAYPAL)
Encore merci
Oops pour ton aide à la confection du tuto et tes fichiers !
ainsi que a corenting.
voilà a+ ( si vous avez réussi avec mon tuto dite le ! )
ps: je compléterais ce Tuto de manière a ce qu'il soit le plus complet possible.
-
samir11
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 21 Mar 2010 13:56
-
weaponsb
- Novice
- Members
- Posts: 12
- Joined: Fri 26 Dec 2008 02:03
- Wi-Fi: Oui
- Firmware Wii: 3.3K
- CFW Wii: Cios58 rev 20
- PS3 Dongle: Aucun
-
karlak
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 21 Mar 2010 17:20
-
doublericard
- Nouvel arrivant
- Members
- Posts: 7
- Joined: Sun 21 Mar 2010 17:47
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
thanks, excellent, I'll give it a try
merci excellent je vais essayer
-
jojolafriture
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 21 Mar 2010 18:20
-
tomtom95
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 21 Mar 2010 18:19
-
lgfeel
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 22 Mar 2010 17:09
-
lejournal
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Wed 4 Nov 2009 17:16
-
velet63
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 22 Mar 2010 19:36
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
I'm trying the hack for the Wii 4.2e, since I'm not very used to this kind of stuff, if it works for me, it means it's really easy.
I'll keep you posted.
I'll keep you posted.
Je test le hack pour la Wii 4.2e, n'etant pas tres habitué de ces manip, si ca marche avec moi, c'est que c'est vraiment facile.
Je vous tiens au courant.
Je vous tiens au courant.
-
touchetatante
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Mon 22 Mar 2010 21:42
-
foufou83
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Tue 23 Mar 2010 08:32
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
HI and thanks for the tutorial
SALUT et merci pour le tuto
-
Vince1321
- Novice
- Members
- Posts: 55
- Joined: Sat 27 Sep 2008 19:26
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: Custom IOS36 rev 14
-
alex-06
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Tue 23 Mar 2010 11:59
Re: [TUTORIAL] HACK Wii 4.2E
.............
-
valfredomax
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Tue 20 Oct 2009 17:05
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
Another great moment, thanks a lot!!!!!
Encore un grand moment , merci beaucoup !!!!!
-
alex-06
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Tue 23 Mar 2010 11:59
Re: [TUTORIAL] HACK Wii 4.2E
........
-
youyou2860
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Sat 28 Nov 2009 21:38
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
nice tutorial, thanks 
beau tuto merci 
-
Dieseur
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Tue 23 Mar 2010 19:21
- Wi-Fi: Oui
- Firmware Wii: 3.3K
- CFW Wii: NSP lol
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
Thanks for the tutorial, I'll try it right away.
Merci pour le tuto, j'essaye tout de suite.
-
mano059
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Wed 24 Mar 2010 16:06
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
thanks to you, very very good work
merci a toi tres tres bon taff
-
phil2309
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Wed 24 Mar 2010 16:43
Re: [TUTORIAL] HACK Wii 4.2E
Automatically translated from French.
Thanks for this tutorial
Merci poue ce tuto
-
Wiicolas
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Wed 24 Mar 2010 19:35
![[TUTO] HACK Wii 4.2E](https://defaultprime.com/wp-content/uploads/2009/03/hands-on-wii-system-menu-40-20090325040020889_640w.jpg)
![[TUTO] HACK Wii 4.2E](https://image.blog.livedoor.jp/r35psp/imgs/9/4/949fca8a.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3010_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i82.servimg.com/u/f82/14/02/59/22/2009-080.png)
![[TUTO] HACK Wii 4.2E](https://i82.servimg.com/u/f82/14/02/59/22/2009-082.png)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3210_r11.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3310_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3410_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3510_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/3610_r10.jpg)
![[TUTO] HACK Wii 4.2E](https://i81.servimg.com/u/f81/14/01/48/93/2009-019.png)








