Neither I nor the Tgames forum can be held responsible for any problems resulting from using this application. So know that you use it at your own risk.JoostinOnline has just released cBoot252, a modification of Bootmii as an IOS and of cBoot2.
With this application, you'll be able to launch cBoot2 with bannerbomb, smashstack, and also with the Homebrew Channel, a channel, and finally the priiloader/postLoader.Changelog
v1.1
-Updated Wii Mod to v2.9.
-Removed wiimod folder and wiimod.txt, as support for cBoot252 is now built into Wii Mod.
v1.0b
-Added new HBC icon to Full and HBC packs (thanks fraggelpower666)
-Channel has a new banner and icon (thanks fraggelpower666)
-Changed "BootIOS Mod" to "cBoot252"
v1.0
-First public release
Developer's instructions
All versions can also be launched from the Priiloader. Packs with * can be launched with the postLoader.
The full version lets you use all the methods.
The packs can be combined if you want.
You can replace load.dol with any software that doesn't reload the IOS.
Extract the content of your chosen archive to the root of your SD card. Install "IOS252.wad" and "cBoot252 - B252.wad" with wadmanager. You'll need a fakesigned AHBPROT IOS to do this. You now have cBoot252 installed!
Note: If you're using component cables, delete or rename startup.elf and replace it with startup-comp.elf.
Instructions for each method will be added soon.
Ni moi ni le forum Tgames ne pourront être tenus responsables des problèmes résultant de l'utilisation de cette application. Sachez donc que vous l'utilisez à vos risques et périls.JoostinOnline vient de publier cBoot252, c'est une modification de Bootmii en IOS et du cBoot2.
Avec cette application, vous pourrez lancer le cBoot2 avec bannerbomb, smashtack, et aussi avec l'homebrew channel, une chaîne, et pour finir le priiloader/postLoader.Changelog
v1.1
-Updated Wii Mod to v2.9.
-Removed wiimod folder and wiimod.txt, as support for cBoot252 is now built into Wii Mod.
v1.0b
-Added new HBC icon to Full and HBC packs (thanks fraggelpower666)
-Channel has a new banner and icon (thanks fraggelpower666)
-Changed "BootIOS Mod" to "cBoot252"
v1.0
-First public release
Instructions du développeur
Toutes les versions peuvent également être lancées à partir du Priiloader. Les packs avec * peuvent être lancés avec le postLoader.
La version complète vous permet d'utiliser toutes les méthodes.
Les packs peuvent être combinés si vous voulez.
Vous pouvez remplacer load.dol avec n'importe quel soft qui ne recharge pas l'IOS.
Extraire le contenu de votre archive choisie à la racine de votre carte SD. installer "IOS252.wad" et "cBoot252 - B252.wad" avec wadmanager. Vous aurez besoin d'un IOS ou fakesigned AHBPROT pour le faire. Vous avez maintenant cBoot252 installé!
Remarque: Si vous utilisez des câbles composant, supprimer ou renommer startup.elf et le remplacer par le startup-comp.elf.
Instructions pour chaque méthode seront bientôt ajoutés.
I already had trouble understanding some things back in the cboot2 days ......
Let me explain, when installing cboot2 to recover the armboot.bin does something get installed on the Wii? If so, where? apparently not on an IOS since it didn't show up on my syscheck.
Now apparently there's an IOS 252 in Wad form in the archive, ok! with a channel to launch cboot252, I quote:
JoostinOnline: "Load cboot2 through a custom channel (included)" = I assume that's the "cboot252 - B252.wad" contained in the wad folder of the archive.
So far so good.
Now for the Homebrew to launch with HBC, what does it act as, an installer, or does it just launch cboot252, and if so do you need to install the IOS 252 and the cboot252 channel first?
Then I assume the private Games folder should be renamed "private", the one for launching cboot252 with the Smash Stack, Indiana thing exploits etc....
Same for the "private BB1" folder for BannerBomb v1 and the "private BB2" folder for Bannerbomb v2.
The startup.elf file ok that's like cboot2, but what's the startup-comp.elf file for?
Should the bootcb2 folder be renamed to bootmii, so it can be launched with bootmii?
As for the boot.dol, boot.elf and load.dol files (the ones at the root), what do they correspond to? is that wadmanager to put at the root like cboot2, or are they the files for Bannerbomb, and which one corresponds to what?
Am I the only one struggling this much? I think the author could have put a little "readme" in the archive, that would have been nice.
J'avais déjà eu du mal à comprendre certaines choses à l'époque du cboot2 ......
Je m'explique, quand on installait le cboot2 pour récupérer le armboot.bin est-ce que quelque chose s'installait sur la Wii ? Si oui, ou ca ? apparemment pas sur un IOS car ca n'apparaissait pas sur mon syscheck.
Maintenant apparemment il y a un IOS 252 en Wad dans l'archive, ok ! avec une chaine pour lancer cboot252, je site :
JoostinOnline : "Load cboot2 through a custom channel (included)" = je suppose que c'est le "cboot252 - B252.wad" contenu dans le dossier wad de l'archive.
Jusque là tout va bien.
Maintenant pour l'Homebrew à lancer avec HBC, c'est quoi un installer ou alors il sert juste à lancer cboot252 et si c'est le cas il faut installer l'IOS 252 et la chaine cboot252 avant ?
Ensuite je suppose que le dossier private Games est à renommer en "private" c'est celui pour lancer cboot252 avec les failles Smash Stack, Indiana chose etc....
Idem pour le dossier "private BB1" pour BannerBomb v1 et le dossier "private BB2" pour Bannerbomb v2.
Le fichier startup.elf ok c'est comme cboot2, mais le fichier startup-comp.elf c'est quoi ?
Le dossier bootcb2 est à renommer en bootmii, pour pouvoir le lancer avec bootmii ?
Quand aux fichier boot.dol, boot.elf et load.dol (ceux qui se trouvent à la racine), ils correspondent à quoi eux ? c'est wadmanager à mettre à la racine comme cboot2 ou ce sont les fichiers pour Bannerbomb, et lequel correspond à quoi ?
Il n'y a que moi qui rame autant ? je pense que l'auteur aurait pu mettre un petit "readme" dans l'archive ca aurait été sympa.
"Note: If you're using component cables, remove or rename startup.elf and replace it with startup-comp.elf."
Cool that already answers one of the questions I had.
"Instructions for each method will be added soon."
Wait and see then....
Oops wrote:ok but once cboot252 is launched... what does it do?
Actually if it's like cboot2, it lets you run a patched IOS without installing it using the BootMii loader which will let you, for example, launch WadManager, DopMii or others in order to install an IOS, system menu etc...
Which would be handy, for example to install the IOS matching your System Menu then the SM to be able to unbrick without having to do a NAND restore (Very useful if you can no longer launch the HBC and don't want to risk a restore, or if that's impossible).
kalidor wrote:Ajout des instructions du développeur
Merci Kalidor
"Remarque: Si vous utilisez des câbles composant, supprimer ou renommer startup.elf et le remplacer par le startup-comp.elf."
Cool déjà ca répond à l'une des questions que je me posais.
"Instructions pour chaque méthode seront bientôt ajoutés."
Wait and see donc....
Oops wrote:ok mais une fois cboot252 lancé... ça fait quoi?
En fait si c'est comme cboot2, ca permet de lancer un IOS patché sans l'installer en utilisant le loader BootMii qui permettra par exemple de lancer WadManager, DopMii ou autre afin d'installer un IOS, system menu etc...
Ce qui serait pratique, par exemple pour installer l'IOS correspondant à son System Menu puis le SM pour pouvoir débriquer sans pour autant faire une restauration de NAND (Fort utile si on ne peut plus lancer l'HBC et si on ne souhaite pas prendre le risque d'une restauration ou si celle-ci est impossible).
Tgames only uses the cookies the board needs (login, preferences). Embedded videos and audio (YouTube, Dailymotion, SoundCloud…) set their own cookies: they are only loaded with your consent. Learn more