This method is a translation from the site
www.wiihacks.com.
TESTED AND WORKING
The original topic can be found here =>
https://www.wiihacks.com/bricked-wii-is ... ere-2.html
by
ShadowSonic2
This method is only valid for people who have a "fully" bricked console, with Bootmii installed as Boot2 but who haven't managed or can't mount their NAND backup.
you need to remove the gamecube memory card from the 2nd port
Preparing the SD card
1 - Download this pack:
2 - Unzip the pack to the root of your SD card, you should get this:
Image unavailable (removed by its host)
3 - Then download the file corresponding to the system menu and the region of the WII before the brick
Spoiler
3.2 USA
IOS30-v1040
System Menu v289 (3.2u)
3.4 USA
IOS50-v4889
System Menu v385 (3.4u)
4.1 USA
IOS60patched
System Menu v449 (4.1u)
4.2 USA
IOS 70:
System Menu v481 (4.2u):
3.2 PAL
IOS30-v1040
System Menu v290 (3.2e)
3.4 PAL
IOS50-v4889
System Menu v386 (3.4e)
4.1 PAL
IOS60patched
System Menu v450 (4.1e)
4.2 PAL
IOS 70:
System Menu v482 (4.2e):
4 - Then create a folder named "
wad" at the root of your SD card, it should now look like this:
Image unavailable (removed by its host)
5 - Unzip the system files pack downloaded above, and put all the .wad files into the wad folder of the SD card.
Unbricking
1- Insert the SD card into the WII and turn it on => WadManager appears
2 - press :wiib: to choose "No IOS Reload" or select IOS 36 by pressing :wiia:
3 - install the IOS and system menu that are in the form of wads
4 -
Restart the WII by pressing the :wiihome: button, after the restart, turn off the WII
5 - remove the SD card and restart the WII: it's unbricked.
Notes
Note 1
If the first pack doesn't work, you can try Wad Manager v1.4 + cBoot2.
To do this, erase everything on your SD card and get this pack:
Unzip the pack to the root of the SD and pick back up at
3 of "preparing the SD"
Note 2
if you want to launch the Homebrew Channel rather than Wad Manager:
replace the "
boot.dol" that's at the root of the SD with this one from Antonito's tutorial.
Cette méthode est une traduction issue du site
www.wiihacks.com.
TESTED AND WORKING
Le topic d'origine est accessible ici =>
https://www.wiihacks.com/bricked-wii-is ... ere-2.html
by
ShadowSonic2
Cette méthode n'est valable que pour les personnes qui ont un "fully" brick, avec Bootmii installé en Boot2 mais qui n'ont pas fait ou qui ne peuvent pas monter leur sauvegarde de NAND.
vous devez enlever la carte mémoire gamecube du 2e port
Préparation de la carte SD
1 - Télécharger ce pack :
2 - Dézipper le pack à la racine de votre carte SD, vous devriez obtenir ceci :
3 - Télécharger ensuite le fichier correspondant au système menu et à la région de la WII avant le brick
Spoiler
3.2 USA
IOS30-v1040
System Menu v289 (3.2u)
3.4 USA
IOS50-v4889
System Menu v385 (3.4u)
4.1 USA
IOS60patched
System Menu v449 (4.1u)
4.2 USA
IOS 70 :
System Menu v481 (4.2u) :
3.2 PAL
IOS30-v1040
System Menu v290 (3.2e)
3.4 PAL
IOS50-v4889
System Menu v386 (3.4e)
4.1 PAL
IOS60patched
System Menu v450 (4.1e)
4.2 PAL
IOS 70 :
System Menu v482 (4.2e) :
4 - Créer ensuite un dossier nommé "
wad" à la racine de cotre carte SD, celle ci devrait maintenant ressembler à cela :
5 - Dézipper le pack de fichiers système téléchargé plus haut, et placer tous les fichiers .wad dans le dossier wad de la carte SD.
Débrickage
1- Insérer la carte SD dans la WII et l'allumer => apparition de WadManager
2 - appuyer sur :wiib: pour choisir "No IOS Reload" ou sélectionner l'IOS 36 en appuyant sur :wiia:
3 - installer les IOS et système menu qui sont sous la forme de wad
4 -
Redémarrer la WII en appuyant sur le bouton :wiihome: , après le redémarrage, éteindre la WII
5 - retirer la carte SD et redémarrer la WII : elle est débrickée.
Notes
Note 1
Si le premier pack ne fonctionne pas, vous pouvez essayer Wad Manager v1.4 + cBoot2.
Pour cela, effacer tout ce qui est sur votre carte SD et récupérer ce pack :
Dézipper le pack à la racine de la SD et reprendre au
3 de "préparation de la SD"
Note 2
si vous souhaitez lancer l'Homebrew Channel plutôt que Wad Manager :
remplacer le "
boot.dol" qui est à la racine de la SD par celui ci du tuto de Antonito.