[TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
-
geebee
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Fri 23 Oct 2009 09:36
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
yog777
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 24 Oct 2009 06:55
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
my wii has been bricked, not chipped, since last night
I had downgraded to install the homebrew channel, and afterward to be able to play rock band I did an update.........
result black screen at startup .... no signal ....
I'll go test your technique ....
j ai ma wii bricker non puce depuis hier soir
j avais downgrader pour installer la chaine hombrew , et apres pour pouvoir j ouer a rock band j ai fait une mis a jour.........
resultat ecran noir au demarrage .... pas de signal ....
je vai test ta technique ....
-
sebix
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sat 24 Oct 2009 12:08
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: CIOS REV14
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
Preloader no longer launches with the reset button, I have a black screen at startup, savemii free doesn't work.
I'm going to test this method.
EDIT:
The DVD doesn't launch when the wii starts up.
all that's left for me is to buy a savemii dongle
Peloader ne se lance plus avec le bouton reset, j'ai un écran noir au démarrage, le savemii free ne fonctionne pas.
Je vais tester cette méthode.
EDIT :
Le DVD ne se lance pas lorsque la wii démarre.
il ne me reste plus qu'à acheter un savemii dongle
-
xav59113
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 24 Oct 2009 22:20
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
my wii has been bricked, not chipped, since last night
I was on 3.2 and my daughter wanted to play mario tennis and did the update.
So wii bricked.
Black screen.
Can I use the tutorial?
Thanks
j ai ma wii bricker non puce depuis hier soir
J'etais en 3.2 et ma fille a voulue jouer a mario tennis et elle a fait la mise a jour.
Donc wii briquer.
Ecran noir.
Est ce que le tuto je peux l'utiliser?
Merci
-
vava
- Nouvel arrivant
- Members
- Posts: 6
- Joined: Sun 3 May 2009 11:37
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: cIOS57 rev19
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
If you have a chip or cioscorp you might have a chance otherwise give up, either use the warranty or sell it for scrap for a pittance...
Si tu as une puce ou le cioscorp tu as peut être une chance sinon laisse tomber, soit tu fait jouer la garantie soit tu la revend une misère pour pièce...
-
pato
- Nouvel arrivant
- Members
- Posts: 8
- Joined: Sun 25 Oct 2009 02:05
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
Martel1
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Thu 22 Oct 2009 17:38
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
one small note: the wii is chipped (but I don't know the method; by the way how do you tell without opening it up) it's my brother's and isn't bricked but since it's on 3.4E (so I'd like to put it on 3.2) because I can't access the USB port for my external hard drive (I understood how to put isos on it with WBFSmanager); I thought that with a chip you could do everything (and I realize that's not the case). So I'm hesitant to do the operation (since the WII works fine for games and especially isn't mine). Is it really safe if you have a chip.
Or would there be another way or a program to make the external drive recognized on the USB port without downgrading?? I tried USBloader 1.5 and Wiiflow (but message saying I'm missing IOS 249)
by the way, I want to say the tutorials are very well made. and that I've only known the wii for 2 days (so I'm discovering a bit more every day)
petite précision : la wii est pucée (mais ignore la méthode ; au passage comment le savoir sans la démonter) c'est celle de mon frère et n'est pas brickée mais comme elle est en 3.4E (donc je voudrais la mettre en 3.2) car je peux pas accéder au port USB pour mon disque dur externe (j'ai compris comment mettre les iso dessus avec WBFSmanager) ; je pensais qu'avec 1 puce on pouvait tout faire (et me rend compte que non). Donc j'hésite à faire la manip (vu que la WII marche bien pour les jeux et surtout ne m'appartient pas). Est-ce vraiment sans danger si on a 1 puce.
Ou alors y aurait il 1 autre façon ou 1 programme pour faire reconnaitre le disque externe sur le port USB sansdowngrader ?? j'ai essayé USBloader 1.5 et Wiiflow (mais message comme quoi il me manque IOS 249 )
au passage, je tiens à dire que les tutos sont très bien faits. et que je ne connais la wii que depuis 2 jours seulement (donc, j'en découvre 1 peu plus tous les jours)
-
coolmen14
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 26 Oct 2009 19:40
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
wii2710
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Tue 27 Oct 2009 16:41
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
Nounoursse
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Wed 28 Oct 2009 23:43
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
matt6422
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Thu 29 Oct 2009 11:25
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
greg131001
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Sat 31 Oct 2009 09:10
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
james4000
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Sat 31 Oct 2009 10:40
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
servity
- Novice
- Members
- Posts: 38
- Joined: Tue 27 Oct 2009 22:27
- Wi-Fi: Oui
- Firmware Wii: 3.2U
- CFW Wii: Aucun
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
servity
- Novice
- Members
- Posts: 38
- Joined: Tue 27 Oct 2009 22:27
- Wi-Fi: Oui
- Firmware Wii: 3.2U
- CFW Wii: Aucun
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
help meLosS wrote:TUTORIAL by LosS:
How to unbrick a bricked Wii, even without the "twilight hack" save,
only in "3.2E - 3.3E - 3.4E" and to be confirmed for the 4:
ATTENTION: this tutorial concerns people who had already installed "CISCORP V1/V2" and a "CHIP" before their brick.
The cause of the brick:
-Bad flashing of the xxxxxx.wad.
-Bad installation of a "cSM" theme.
-Corrupted system menu file.
-Semi-brick or full brick (doesn't work for all "full brick" cases).
-Preloader.
-Frozen system menu.
-For anyone who mixes up the pal and ntsc file like: "00000042.app" and "00000045.app"
etc..........
The principle when you brick your Wii, the first things to check before any conclusion:
-That you've already installed "cioscorp" or a "chip".
-Homebrew channel already installed.
-First check if it's not your graphics/video card that simply gave out.(black screen on the tv)
-The connections, oh yes that can happen too.
-The cause of the brick if you knew it.(installation, flash etc...)
-Download the iso pack:This content is for members only. Log in or register for free to see it.-Burn the downloaded iso onto a dvd-r,
-preferably burn at x4 with the "verbatim" brand using "imgburn" or "nero".
-The downloaded iso is an "autoboot wadmanager v1.1", I won't explain it further, you must already know "wadmanager" lol.
-Download the pack for the "SD" card:This content is for members only. Log in or register for free to see it.Copy to the root of your "SD" card.
The method I'm showing you is to put your wii system back to 3.2E without the net of course by using "the wadmanager autoboot".
-When you're done burning, put the "autoboot wadmanager DVD" in the wii along with your "SD" card.
-If everything goes well the "autoboot wadmanager DVD" launches all by itself, a menu "wadmanager v1.1" will appear along with the files found on the "SD" card, the ".wad".
The "autoboot wadmanager DVD" serves precisely to install the wads without going through "HBC" since it boots automatically at the wii's startup provided that before the brick you had already installed "cioscorp" or the "chip".
For those who were on 3.2E before the brick :
Just install the:
5-SystemMenu-v290.wad
There you've just put your system menu back to 3.2E,
for the rest of the installation go directly to STEP on "HBC"
Personally I redid it from scratch
Otherwise for those who were on 3.3E and 3.4E:
Follow this TUTORIAL:
Install in order one after the other :
1-IOS16-64-v257-prod.wad
2-IOS30-64-v1040.wad
3-RVL-mios-v5.wad.out.wad
4-RVL-bc-v2.wad.out.wad
5-SystemMenu-v290.wad
Anyway I numbered it, you can't go wrong.
There you've just downgraded your Wii without the net to 3.2E
STEP on "HBC":
And there your Wii is on 3.2E
Now you're starting fresh again with this tutorial :
Tutorial to launch backups on the wii from A to Z
-The rest of the installation is up to you depending on your config: "HBC, ciscorp, starfall, preloader, backup launcher etc......"
-I didn't include it since it's already on the "Tgames Forum" site and several tutorials have been made, and made well too ^^.
Personally I finished installing it like this:
6-Cioscorp V1(21 patched wad)
7-Custom Rev 9 --- you need "IOS36-64-v1042.wad"
at the root of your card if you're using it without the net.
8-Starfall (Antibrick -anti update -Region Free)
9-Miospatcher 3(GameCube_Games)
10-The last installation step is to reboot the wii.
Bonus video:
Summary of my brick:
By trying to install a "csm" found online, I simply bricked my Wii, black screen, the controller stopped responding and on top of that I didn't have the "twilight hack" save just "starfall" and "ciscorp" installed and of course "HBC".
The video I made, I bricked the wii live to show you the tutorial and the steps to follow, in the video you'll see a GC controller that's normal I wanted to reboot into starfall and you'll see when I inserted the original zelda game you should notice that I didn't have the twilight hack save and that I just installed "SystemMenu-v290.wad.", because I only bricked the banner and nothing else and I finished the rest of the installation on the "HBC".
Go ahead, enjoy watching everyone.
As for me, to this day, my wii has bricked 8 times since December 2008, the bricks I've had aren't all the same, due to my bad custom, preloader brick, corrupted system file basically pretty much everything ^^ plus the worst scare I had was when I no longer had the "Twilight hack" save imagine the panic!!!!!! lol
PS: To download the packs you have to post and follow up on your problem, whether "yes" or "no" it unbricked your wii.
aider moiLosS wrote:TUTO by LosS :
Comment débricker la Wii brickée, même sans la sauvegarde de "twilight hack",
seulement en "3.2E - 3.3E - 3.4E" et à confirmer pour la 4 :
ATTENTION: ce tuto concerne les personnes qui ont déjà installé "CISCORP V1/V2" et "PUCE" avant leur brick.
La cause du brick :
-Mauvais flashage du xxxxxx.wad.
-Mauvaise installation d'un thème "cSM".
-Fichier systeme menu corrompu.
-Semi-brick ou full brick (ne marche pas pour tous les cas en "full brick").
-Preloader.
-Systeme menu qui freeze.
-Pour celui qui se trompe de fichier pal et ntsc comme: "00000042.app" et "00000045.app"
etc..........
Le principe quand vous brickez votre wii, les 1ères choses à vérifier avant toute conclusion :
-C'est d'avoir déjà installé "cioscorp" ou "puce".
-Homebrew channel déja installé.
-Regardé d'abord si c'est pas votre carte graphique, vidéo qui a tout simplement lâché.(écran noir sur télé)
-Les branchements, hé oui ça peut arriver.
-La cause du brick si vous le saviez.(installation, flash etc...)
-Télécharger le pack iso :This content is for members only. Log in or register for free to see it.-Graver l'iso télécharger sur dvd-r,
-gravure en x4 de préférence la marque "verbatim" avec "imgburn" ou "nero".
-L'iso téléchargé est un "autoboot wadmanager v1.1", je vous l'explique pas plus, vous devez le connaitre "wadmanager" mdr.
-Télécharger le pack pour la carte "SD" :This content is for members only. Log in or register for free to see it.Copier à la racine de votre carte "SD".
La méthode que je vous montre c'est de remettre votre systeme wii en 3.2E sans le net bien sûr en utilisant "l'autoboot wadmanager".
-Quand vous aurez finir de graver, mettez le "DVD autoboot wadmanager" dans la wii ainsi votre carte "SD".
-Si tout se passe bien le "DVD autoboot wadmanager" se lance tout seule, un menu "wadmanager v1.1" va apparaitre ainsi que les fichiers qui se trouvent sur la carte "SD", les ".wad".
Le "DVD autoboot wadmanager" nous sert justement à installer les wad sans passer par "HBC" vu qu'il se boot automatiquement au démarrage de la wii à condition avant le brick vous ayez déjà installer le "cioscorp" ou la "puce".
Pour ceux qu'il était en 3.2E avant le brick :
Installez juste le :
5-SystemMenu-v290.wad
Voilà vous venez de remettre votre systeme menu 3.2E,
pour le reste de l'installation passez directement a ETAPE sur "HBC"
Perso j'ai refait à neutre
Sinon pour ceux qui était en 3.3E et 3.4E :
Suivez ce TUTO :
Installez a la suite dans l'ordre :
1-IOS16-64-v257-prod.wad
2-IOS30-64-v1040.wad
3-RVL-mios-v5.wad.out.wad
4-RVL-bc-v2.wad.out.wad
5-SystemMenu-v290.wad
De toute façon je l'ai numéroté,vous ne pourrez pas vous tromper.
Voilà vous venez de downgrader votre wii sans le net en 3.2E
ETAPE sur "HBC" :
Et la votre Wii est en 3.2E
Maintenant vous repartez à neutre avec ce tuto :
Tuto lancer des backup sur wii de A a Z
-Le reste d'installation c'est à vous de voir selon votre config: "HBC, ciscorp, starfall, préloader, backup launcher etc......"
-je l'ai pas mis vu qu'il est déjà sur le site de "Tgames Forum" et plusieurs tutos ont été fait et bien fait en plus ^^.
Perso j'ai fini d' installer comme ça :
6-Cioscorp V1(21 wad patché)
7-Custom Rev 9 --- il vous faut "IOS36-64-v1042.wad"
à la racine de votre carte si vous utilisez sans le net.
8-Starfall (Antibrick -anti MAJ -Région Free)
9-Miospatcher 3(Jeux_GameCube)
10-La dernière installation, c'est de rebooté la wii.
Vidéo en bonus :
Résumé de mon brick :
En voulant installer un "csm" trouvé sur le net, j'ai tout simplement brické ma wii, écran noir, la manette ne répondait plus et de plus j'ai ni la sauvegarde "twilight hack" juste "starfall" et "ciscorp installé dessus et bien sur "HBC".
La vidéo que j' ai faite, j'ai brické la wii express pour vous montrer le tuto et la manip a suivre, sur la vidéo vous allez voir une manette GC c'est normal j'ai voulu le rebooté sur starfall et vous verrez bien quand j'ai inséré le jeux original zelda vous devrez apercevoir que j'avais pas la sauvegarde de twilight hack et que j'ai juste installé "SystemMenu-v290.wad.", parce que j'ai juste brick la bannière et rien d'autre et j'ai fini le reste d'installation sur la "HBC".
Allez bonne vision a tous.
Pour moi, j'ai eu à ce jour, ma wii a brické 8 fois depuis décembre 2008, les bricks que j'ai eu ne sont tous pas les mêmes, dûs a mon mauvais custom, brick du preloader, fichier systeme corrompu bref on va dire presque la totale quoi ^^ en plus le pire que j'ai eu chaud j"avais plus la sauvegarde du "Twilight hack" imaginez la panique !!!!!! lol
PS: Pour télécharger les packs vous devez poster et redonner suite à votre problème, si "oui" ou "non" ça a débrické votre wii.
-
servity
- Novice
- Members
- Posts: 38
- Joined: Tue 27 Oct 2009 22:27
- Wi-Fi: Oui
- Firmware Wii: 3.2U
- CFW Wii: Aucun
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
attack02
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 31 Oct 2009 12:54
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
Oldchip
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 31 Oct 2009 15:40
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
moivall77
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 31 Oct 2009 18:30
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
wwe249
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Sun 1 Nov 2009 09:15
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
cricri36600
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 1 Nov 2009 13:45
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
sadovich
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Tue 3 Nov 2009 15:49
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
Thanks
Merci
-
john dereck
- Novice
- Members
- Posts: 52
- Joined: Sun 26 Oct 2008 16:10
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: CIOS 38 Rev 14
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
querai95
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Mon 26 Oct 2009 20:56
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
robin2000
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Thu 5 Nov 2009 16:49
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.