[TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
-
Trymeon
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Wed 26 Aug 2009 20:49
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
atupac
- Initié
- Members
- Posts: 124
- Joined: Thu 13 Nov 2008 23:28
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: CIOS 36 REV09
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
- put the "autoboot wadmanager DVD" in the wii along with your "SD" card:
-> should I put in the DVD and turn off the wii, then turn it back on?
-If everything goes well the "autoboot wadmanager DVD" launches all by itself...:
-> do we need to hold down some button when powering on the wii with the dvd inside? (reset, eject, B on the GC controller,...)
-> If we have a chip (I have a Wiikey 2), do we need to set the "Autoboot" option to ON in the chip's menu using the config/update dvd?
- ..., a "wadmanager v1.1" menu will appear along with the files found on the "SD" card, the ".wad":
-> Are we REQUIRED to have the SD card (with the wad folder) in the wii?
Thanks.
- mettez le "DVD autoboot wadmanager" dans la wii ainsi votre carte "SD" :
-> doit mettre le DVD et eteindre la wii, puis la ralluer?
-Si tout se passe bien le "DVD autoboot wadmanager" se lance tout seule...:
-> doit on resté appuyé sur un bouton quelconque à l'allumage de la wii avec le dvd dedans? (reset, eject, B de la manette GC,...)
-> Si on a une puce (j'ai une Wiikey 2),doit-on mettre sur ON l'option "Autoboot" dans le menu de la puce à l'aide du dvd de configuartion/maj ?
- ..., un menu "wadmanager v1.1" va apparaitre ainsi que les fichiers qui se trouvent sur la carte "SD", les ".wad":
-> On est OBLIGE d'avoir la carte SD (avec le dossier wad) dans la wii ?
Merci.
-
madplayer
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Thu 27 Aug 2009 19:34
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
I just bricked my Wii by mistake.
I had firmware 3.1E installed.
and while updating my Wii to play wii sport resort it turns on but there black screen and nothing.
je viens de briker par erreur ma wii.
j'avais le firmware 3.1E d'installé.
et en faisanr la mise à jour de ma wii pour jouer à wii sport resort elle s'allume mais là ecran tout noir et rien.
-
t1b4ut
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Fri 28 Aug 2009 17:26
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
I'm going to try doing it I'll let you know if it works or not!
je vais essayer de le faire je previent si sa marche ou pas !
-
smok
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 31 Aug 2009 16:40
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
I have prelaoder V0.29
I'm testing the tutorial with the SD
j'ai prelaoder V0.29
je test le tuto avec la SD
-
leportos76
- Nouvel arrivant
- Members
- Posts: 2
- Joined: Tue 1 Sep 2009 06:55
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
LosS wrote:TUTORIAL by LosS:
How to unbrick a bricked Wii, even without the "twilight hack" save,
only in "3.2E - 3.3E - 3.4E" and to be confirmed for the 4:
ATTENTION: this tutorial concerns people who had already installed "CISCORP V1/V2" and a "CHIP" before their brick.
The cause of the brick:
-Bad flashing of the xxxxxx.wad.
-Bad installation of a "cSM" theme.
-Corrupted system menu file.
-Semi-brick or full brick (doesn't work for all "full brick" cases).
-Preloader.
-Frozen system menu.
-For anyone who mixes up the pal and ntsc file like: "00000042.app" and "00000045.app"
etc..........
The principle when you brick your Wii, the first things to check before any conclusion:
-That you've already installed "cioscorp" or a "chip".
-Homebrew channel already installed.
-First check if it's not your graphics/video card that simply gave out.(black screen on the tv)
-The connections, oh yes that can happen too.
-The cause of the brick if you knew it.(installation, flash etc...)
-Download the iso pack:
Hidden message
-Burn the downloaded iso onto a dvd-r,
-preferably burn at x4 with the "verbatim" brand using "imgburn" or "nero".
-The downloaded iso is an "autoboot wadmanager v1.1", I won't explain it further, you must already know "wadmanager" lol.
-Download the pack for the "SD" card:
Hidden message
Copy to the root of your "SD" card.
The method I'm showing you is to put your wii system back to 3.2E without the net of course by using "the wadmanager autoboot".
-When you're done burning, put the "autoboot wadmanager DVD" in the wii along with your "SD" card.
-If everything goes well the "autoboot wadmanager DVD" launches all by itself, a menu "wadmanager v1.1" will appear along with the files found on the "SD" card, the ".wad".
The "autoboot wadmanager DVD" serves precisely to install the wads without going through "HBC" since it boots automatically at the wii's startup provided that before the brick you had already installed "cioscorp" or the "chip".
For those who were on 3.2E before the brick :
Just install the:
5-SystemMenu-v290.wad
There you've just put your system menu back to 3.2E,
for the rest of the installation go directly to STEP on "HBC"
Personally I redid it from scratch
Otherwise for those who were on 3.3E and 3.4E:
Follow this TUTORIAL:
Install in order one after the other :
1-IOS16-64-v257-prod.wad
2-IOS30-64-v1040.wad
3-RVL-mios-v5.wad.out.wad
4-RVL-bc-v2.wad.out.wad
5-SystemMenu-v290.wad
Anyway I numbered it, you can't go wrong.
There you've just downgraded your Wii without the net to 3.2E
STEP on "HBC":
And there your Wii is on 3.2E
Now you're starting fresh again with this tutorial :
Tutorial to launch backups on the wii from A to Z
-The rest of the installation is up to you depending on your config: "HBC, ciscorp, starfall, preloader, backup launcher etc......"
-I didn't include it since it's already on the "Tgames Forum" site and several tutorials have been made, and made well too ^^.
Personally I finished installing it like this:
6-Cioscorp V1(21 patched wad)
7-Custom Rev 9 --- you need "IOS36-64-v1042.wad"
at the root of your card if you're using it without the net.
8-Starfall (Antibrick -anti update -Region Free)
9-Miospatcher 3(GameCube_Games)
10-The last installation step is to reboot the wii.
Bonus video:
Summary of my brick:
By trying to install a "csm" found online, I simply bricked my Wii, black screen, the controller stopped responding and on top of that I didn't have the "twilight hack" save just "starfall" and "ciscorp" installed and of course "HBC".
The video I made, I bricked the wii live to show you the tutorial and the steps to follow, in the video you'll see a GC controller that's normal I wanted to reboot into starfall and you'll see when I inserted the original zelda game you should notice that I didn't have the twilight hack save and that I just installed "SystemMenu-v290.wad.", because I only bricked the banner and nothing else and I finished the rest of the installation on the "HBC".
Go ahead, enjoy watching everyone.
As for me, to this day, my wii has bricked 8 times since December 2008, the bricks I've had aren't all the same, due to my bad custom, preloader brick, corrupted system file basically pretty much everything ^^ plus the worst scare I had was when I no longer had the "Twilight hack" save imagine the panic!!!!!! lol
PS: To download the packs you have to post and follow up on your problem, whether "yes" or "no" it unbricked your wii.
LosS wrote:TUTO by LosS :
Comment débricker la Wii brickée, même sans la sauvegarde de "twilight hack",
seulement en "3.2E - 3.3E - 3.4E" et à confirmer pour la 4 :
ATTENTION: ce tuto concerne les personnes qui ont déjà installé "CISCORP V1/V2" et "PUCE" avant leur brick.
La cause du brick :
-Mauvais flashage du xxxxxx.wad.
-Mauvaise installation d'un thème "cSM".
-Fichier systeme menu corrompu.
-Semi-brick ou full brick (ne marche pas pour tous les cas en "full brick").
-Preloader.
-Systeme menu qui freeze.
-Pour celui qui se trompe de fichier pal et ntsc comme: "00000042.app" et "00000045.app"
etc..........
Le principe quand vous brickez votre wii, les 1ères choses à vérifier avant toute conclusion :
-C'est d'avoir déjà installé "cioscorp" ou "puce".
-Homebrew channel déja installé.
-Regardé d'abord si c'est pas votre carte graphique, vidéo qui a tout simplement lâché.(écran noir sur télé)
-Les branchements, hé oui ça peut arriver.
-La cause du brick si vous le saviez.(installation, flash etc...)
-Télécharger le pack iso :
Message caché
-Graver l'iso télécharger sur dvd-r,
-gravure en x4 de préférence la marque "verbatim" avec "imgburn" ou "nero".
-L'iso téléchargé est un "autoboot wadmanager v1.1", je vous l'explique pas plus, vous devez le connaitre "wadmanager" mdr.
-Télécharger le pack pour la carte "SD" :
Message caché
Copier à la racine de votre carte "SD".
La méthode que je vous montre c'est de remettre votre systeme wii en 3.2E sans le net bien sûr en utilisant "l'autoboot wadmanager".
-Quand vous aurez finir de graver, mettez le "DVD autoboot wadmanager" dans la wii ainsi votre carte "SD".
-Si tout se passe bien le "DVD autoboot wadmanager" se lance tout seule, un menu "wadmanager v1.1" va apparaitre ainsi que les fichiers qui se trouvent sur la carte "SD", les ".wad".
Le "DVD autoboot wadmanager" nous sert justement à installer les wad sans passer par "HBC" vu qu'il se boot automatiquement au démarrage de la wii à condition avant le brick vous ayez déjà installer le "cioscorp" ou la "puce".
Pour ceux qu'il était en 3.2E avant le brick :
Installez juste le :
5-SystemMenu-v290.wad
Voilà vous venez de remettre votre systeme menu 3.2E,
pour le reste de l'installation passez directement a ETAPE sur "HBC"
Perso j'ai refait à neutre
Sinon pour ceux qui était en 3.3E et 3.4E :
Suivez ce TUTO :
Installez a la suite dans l'ordre :
1-IOS16-64-v257-prod.wad
2-IOS30-64-v1040.wad
3-RVL-mios-v5.wad.out.wad
4-RVL-bc-v2.wad.out.wad
5-SystemMenu-v290.wad
De toute façon je l'ai numéroté,vous ne pourrez pas vous tromper.
Voilà vous venez de downgrader votre wii sans le net en 3.2E
ETAPE sur "HBC" :
Et la votre Wii est en 3.2E
Maintenant vous repartez à neutre avec ce tuto :
Tuto lancer des backup sur wii de A a Z
-Le reste d'installation c'est à vous de voir selon votre config: "HBC, ciscorp, starfall, préloader, backup launcher etc......"
-je l'ai pas mis vu qu'il est déjà sur le site de "Tgames Forum" et plusieurs tutos ont été fait et bien fait en plus ^^.
Perso j'ai fini d' installer comme ça :
6-Cioscorp V1(21 wad patché)
7-Custom Rev 9 --- il vous faut "IOS36-64-v1042.wad"
à la racine de votre carte si vous utilisez sans le net.
8-Starfall (Antibrick -anti MAJ -Région Free)
9-Miospatcher 3(Jeux_GameCube)
10-La dernière installation, c'est de rebooté la wii.
Vidéo en bonus :
Résumé de mon brick :
En voulant installer un "csm" trouvé sur le net, j'ai tout simplement brické ma wii, écran noir, la manette ne répondait plus et de plus j'ai ni la sauvegarde "twilight hack" juste "starfall" et "ciscorp installé dessus et bien sur "HBC".
La vidéo que j' ai faite, j'ai brické la wii express pour vous montrer le tuto et la manip a suivre, sur la vidéo vous allez voir une manette GC c'est normal j'ai voulu le rebooté sur starfall et vous verrez bien quand j'ai inséré le jeux original zelda vous devrez apercevoir que j'avais pas la sauvegarde de twilight hack et que j'ai juste installé "SystemMenu-v290.wad.", parce que j'ai juste brick la bannière et rien d'autre et j'ai fini le reste d'installation sur la "HBC".
Allez bonne vision a tous.
Pour moi, j'ai eu à ce jour, ma wii a brické 8 fois depuis décembre 2008, les bricks que j'ai eu ne sont tous pas les mêmes, dûs a mon mauvais custom, brick du preloader, fichier systeme corrompu bref on va dire presque la totale quoi ^^ en plus le pire que j'ai eu chaud j"avais plus la sauvegarde du "Twilight hack" imaginez la panique !!!!!! lol
PS: Pour télécharger les packs vous devez poster et redonner suite à votre problème, si "oui" ou "non" ça a débrické votre wii.
-
porthi
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Wed 2 Sep 2009 11:24
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
lanzani
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Fri 4 Sep 2009 14:56
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
sonbook
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 6 Sep 2009 18:40
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
rikta77
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sun 6 Sep 2009 20:20
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
stef2002
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 7 Sep 2009 05:06
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
eloid73
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Mon 7 Sep 2009 22:33
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
loujiano
- Novice
- Members
- Posts: 11
- Joined: Thu 10 Sep 2009 15:26
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
eastman
- Nouvel arrivant
- Members
- Posts: 3
- Joined: Fri 11 Sep 2009 10:57
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
dlerital
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Mon 14 Sep 2009 21:03
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
Fred9595
- Nouvel arrivant
- Members
- Posts: 6
- Joined: Fri 1 May 2009 22:09
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
gilouforever
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Tue 15 Sep 2009 15:48
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
++
++
-
keuloud
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Tue 15 Sep 2009 22:20
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
I'll test it and keep you posted.
Update:
As with all 3.3 & 3.4, without trucha, unofficial autoboots don't work, so it's impossible to boot into wadmanager (even with a chip that accepts autoboot).
If anyone has managed to unbrick a 3.3EU without a TP save, without starfall & all that jazz, just with a chip and an autoboot, let them get in touch, I'm interested.
Je test et vous tiens au courant.
Update:
Comme sur toutes les 3.3 & 3.4, sans trucha, les autoboot non officiels ne fonctionnent pas, et donc impossible de booter sur wadmannager (avec une puce qui accepte l'autoboot).
Si quelqu'un est arrivé à debriquer une 3.3EU sans save TP, sans starfall & tout le tralala, juste avec une puce et un autoboot, qu'il me fasse signe, ça m'interesse.
-
xouabita
- Nouvel arrivant
- Members
- Posts: 8
- Joined: Thu 21 May 2009 17:52
- Wi-Fi: Oui
- Firmware Wii: 3.3U
- CFW Wii: Cios 36 rev 10
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
[jiwa]2599139[/jiwa]
-
xouabita
- Nouvel arrivant
- Members
- Posts: 8
- Joined: Thu 21 May 2009 17:52
- Wi-Fi: Oui
- Firmware Wii: 3.3U
- CFW Wii: Cios 36 rev 10
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
[jiwa]2599139[/jiwa]
-
sulli1289
- Nouvel arrivant
- Members
- Posts: 1
- Joined: Sat 19 Sep 2009 18:04
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
alex10
- Nouvel arrivant
- Members
- Posts: 5
- Joined: Fri 18 Sep 2009 10:53
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
tutur6214
- Nouvel arrivant
- Members
- Posts: 8
- Joined: Wed 9 Sep 2009 12:22
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: cIOS 38 rev 15
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
-
Dosce
- Habitué
- Members
- Posts: 392
- Joined: Fri 20 Feb 2009 15:22
- Wi-Fi: Oui
- Firmware Wii: 3.3J
- CFW Wii: cIOS 38 rev 14
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.
Wouldn't there be a less "heavy" method than the one proposed in the tutorial to help me? (Actually it would bug me to waste a DVD, and if someone can help me without formatting my Wii, so I don't have to reinstall everything, that would be great
Existerait-il pas une méthode moins "lourde" que celle proposée de le tuto pour m'aider ? (En fait ça m'embêterait de gaspiller un DVD, et si on peut m'aider sans formater ma Wii, que je n'ai pas tout à réinstaller, ce serait super
Dosce
-
equaliseur
- Nouvel arrivant
- Members
- Posts: 4
- Joined: Tue 22 Sep 2009 19:00
Re: [TUTORIAL] How to "Unbrick your Wii" in case of brick!!!!!!!!!!!
Automatically translated from French.