Problem Mplayer-ce WiiflowMod

Post by **Vastasio** » Thu 12 Jul 2012 16:37

Hello,
so here's a new problem so a new topic

I'll give my config to start

Wii 4.3E
HBC 1.1.0
Prilloader 0.6
Cios D2x V9 Beta R49 Fix
Cios Hermes V5.1
Willflow mod R522 + Plugin Pack V4.7

WD element 2To Hard Drive (on port 0)
2 partitions
-> 1 primary FAT 32 500Go (Active primary) with 32ko cluster
-> 1 secondary NTFS 1.5TO

SD card (Danelec) 2Go formatted in Fat32

My directories:
Hdd:/Wiiflow/Plugins/Mcplayer-ce.ini (with the dol that goes with it)
hdd:/apps/Mcplayer-ce/
hdd:/Movies

Sd:/Wiiflow/Plugins
Sd:/apps/Mcplayer-ce
Sd:/Movies

I did the tests with: HDD / SD and 4Giga USB key

1st possible Error: MPlayer-CE.dol in the plugins folder

On Wiiflow when launching a movie I get an error:
SD/USB access error
please check ...... Mplayer directory
for the rest (Wii, GC, and emu) no problem except when I quit instead of going back to wiiflow I go back to the wii menu even though I asked to return to wiiflow (including in wiiflow's settings

2nd possible Error: MPlayer-CE.dol in the plugins folder and a boot.dol file in the MPlayer-Ce folder inside the APPS folder

On Wiiflow when launching a movie, black screen and off I go back to the wii menu
for the rest (Wii, GC, and emu) no problem except when I quit instead of going back to wiiflow I go back to the wii menu even though I asked to return to wiiflow (including in wiiflow's settings
I launch from HBC - Mplacer-CE, I load my movie and no problem

And my Syscheck up to date

sysCheck v2.1.0b11 by Double_A and R2-D2199
...running under IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Homebrew Channel 1.0.0 uses IOS58
Hollywood v0x11
Console identifier: 115076594
Boot2 v4
136 titles found.
52 IOS found on this console. 12 are stubs.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No patches
IOS13 (rev 1032): No patches
IOS14 (rev 1032): No patches
IOS15 (rev 1032): No patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No patches
IOS22 (rev 1294): No patches
IOS28 (rev 1807): No patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No patches
IOS33 (rev 3608): No patches
IOS34 (rev 3608): No patches
IOS35 (rev 3608): No patches
IOS36 (rev 3608): No patches
IOS37 (rev 5663): No patches
IOS38 (rev 4124): No patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No patches
IOS43 (rev 3607): No patches
IOS45 (rev 3607): No patches
IOS46 (rev 3607): No patches
IOS48 (rev 4124): No patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No patches
IOS55 (rev 5663): No patches
IOS56 (rev 5662): No patches
IOS57 (rev 5919): No patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No patches
IOS202[60] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 65535, Info: v5.1): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[37] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: v5.1): Trucha Bug, NAND Access, USB 2.0
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21009, Info: d2x-v9beta(r49)): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2012/07/11.

Post by **Ayatus** » Fri 13 Jul 2012 08:23

I don't run into any problem of that kind, have you tried with another USB device?
Your explanations are a bit confusing, there's no interaction between apps/mplayer-ce/boot.dol and WiiFlow.
The latter just launches wiiflow/plugins/mplayerce-svn-r673.dol based on the settings indicated in wiiflow/plugins/mplayerce.ini.

Post by **Vastasio** » Fri 13 Jul 2012 18:33

I rewrote my original post hoping it would be understandable now

Post by **Ayatus** » Fri 13 Jul 2012 18:53

After a few tests, the plugin requires the presence of apps/mplayer-ce with or without boot.dol.
I tested different videos with different encodings, not all of them work (XVID doesn't).

Post by **Vastasio** » Sat 14 Jul 2012 14:38

I did the tests as discussed on IRC

sometimes it works sometimes not :s

I'll follow Mplayer-ce's updates to see

Post by **Ayatus** » Sat 21 Jul 2012 15:54

After digging a bit further, I noticed that only videos whose title contains accented characters don't launch.

Problem Mplayer-ce WiiflowMod