Xecuter Xbox repair kit - Extreme Edition

Post by **ovaler** » Mon 28 May 2012 15:38

Image unavailable (removed by its host) Translated with Google Translate. Sorry but there's too much for me to translate it properly.

After selling more than 150,000 units of the II Pro Repair Kit, Xecuter became the world's most popular manufacturer of Xbox repair kits. Now, after further research and improved techniques in Xbox repair and recovery, Xecuter has designed their new flagship product which has been proven to cure the most defective Xboxes without the need for an expensive reballing. This is the third version of the surprisingly popular Xecuter RROD Xbox 360 (Red Ring Of Death) Repair Kit - the Xecuter XBOX REPAIR KIT - Extreme Edition.

Every repair solution, technical concept and idea has been analyzed to produce a better quality kit, the best performing one ever made. No off-the-shelf parts, no generic screws or parts from a hardware store, no sanding or drilling cuts. Everything was custom made to exact specifications to give you a kit that has been fine-tuned to fit every version of the Xbox 360 (Xenon, Zephyr, Opus, Falcon and Jasper).

THE NEW EXTREME EDITION includes a massive 93-piece kit that introduces a replacement brand for the poorly designed XCLAMP called the BOXX-CLAMP, which was designed to fit all Xbox motherboards perfectly without having to use messy sandpaper to stabilize the areas and to sit perfectly flat against the motherboard to prevent it from warping when the temperature rises inside the Xbox. Specially designed X-bolts have been made to make installing the BOXX-CLAMP easy. No fiddling with tape or other messy methods that you get with other kits that use generic screws, the X-BOLTS simply clip in. Once installed, you'll have a perfectly flat motherboard installation that will protect against any warping and cracking of the solder joints that causes RROD (Red Ring Of Death).

Every failure area has been identified and the Xecuter XBOX REPAIR KIT - Extreme Edition lets you fix the problem, but also protect against future failures.

GPU and CPU

This is the most notorious area of failure on the Xbox 360 due to the design of the X-Clamps. Our goal was to find a solution that not only fixes this problem, but also helps prevent it from happening in the future.

The BOXX-CLAMP fix addresses the many design flaws that continue to plague the Xbox 360 with the infamous RROD (Red Rings of Death). To achieve a secure solution we needed the motherboard to rest on a perfectly flat surface, which was impossible without modifying the spacers by sanding. Another goal was to make sure that even pressure could be applied to the CPU and GPU both above and below the motherboard. Using the precision-designed BOXX-CLAMP & X-BOLTS, we're not only able to have the motherboard sit on a perfectly flat surface without any sanding or drilling, but we're also able to apply even pressure above and below the CPU/GPU using thermal pressure pads below the motherboard. To equalize pressure between the GPU/CPU and the motherboard, the heatsinks we use are high quality and custom made, the polyethylene foam shims, which not only maintain even pressure distribution to prevent GPU or CPU cracking, but also provide shock absorption and are waterproof against any form of shrinkage, mold, rot, and bacteria. These are easy to mount using self-adhesive tape and are applied before the heatsinks which are attached using the X-BOLTS. This solution not only stabilizes and strengthens the motherboard to finally put an end to any warping, but it also helps your system cool better. The metal chassis now acts as a giant heatsink!

4 RAM chips (bottom side of the motherboard)

The soft foam heatsinks that are mounted on the Xbox 360 over the 4 RAM sticks turned out to be completely useless. Not only do they not provide proper thermal protection, but due to the notorious warping of the motherboard when overheating, the solder joints are prone to cracking and because of lead-free solder they crack when the Xbox cools down. Xecuter used a version of thermal pad called K-pad that transfers heat more efficiently and is made with a stronger material that is 25% thicker than standard thermal pads. Being a thicker and stronger material, the K-Pad holds the RAM chip firmly. This K-Pad thermal method has been used in every Xecuter Xbox repair kit since 2006 and has proven itself in tens of thousands of cases.

2 RAM chips (top of the motherboard)

Another area that wasn't addressed by previous repair kits was the RAM chips that sat under the main heatsink on the top side of the motherboard. Tests have shown that these were also prone to failure due to cracking after the motherboard warps, and also because there was little to no heat transfer from the RAM chip to the heatsink. A new version of thermal K-Pad was designed for these RAM chips. Rigorous testing required that the material needed be slightly softer and thinner than standard thermal pads.

Southbridge Chip

Another novelty is the Southbridge clip which will keep the chip secured. The aluminum plate used is highly conductive for thermal transfer, protecting against cracking in the solder joints and reducing chip errors on the Xbox motherboard. A secondary heatsink is also included to give an extra level of protection and prevention.

More than half of all XBOX 360 errors turn out to be related to the Southbridge. The Southbridge controls about 10 components on your Xbox 360. The most common errors that can be related to the Southbridge are E71, E73, 0021, as well as E67, E69, E76, E79. Can fix secondary codes including 1003, 1011, 1030, 1033, 0010, and 0021.

ANA / HANA Chip Scaler

The Xbox 360 uses a specialized chip to adjust the size of the video image on the screen. Overheating can cause an "E74" error to appear on the screen. A high quality heatsink is provided to protect against and prevent this error.

DVD Drive

Xecuter also provides a replacement DVD drive belt that matches the original SBS Square type specifications. Also included are 4 foam pads for the DVD drive's inner housing to protect the disc from scratches.

X-Clamp Removal Bonus Tool

As a bonus, and in cooperation with the world-renowned Xbox repair experts at https://www.dports.me , we designed and manufactured a brand new X-Clamp removal tool and included it in the Xecuter Xbox Repair Kit - EXTREME EDITION as a free tool. This tool lets you remove old X-Clamps, a simple and painless process. Just insert and lift the X-Clamp!

The Xecuter Xbox Repair Kit - Extreme Edition includes all the tools needed to perform the best repair of your Xbox 360 at home, without having to ship it out for a reballing. This fix has become the de facto solution for repairing the majority of Xbox 360 RROD (Red Ring of Death) cases.

As this kit addresses RROD issues, we cannot offer any guarantee of 100% success, but it's the most complete kit you'll find, anywhere in the world.

Features:

Huge 93-piece kit
No prep work required (no drilling, no sanding, no cutting!)
Torx 10 screwdriver
Torx 8 screwdriver
Flathead screwdriver
Xbox Unlocker tool V2
X-Clamp removal tool
1 x BOXX-CLAMP
8 x X-BOLTS
40 x steel washers
1 x Southbridge clip
1 x Southbridge heatsink
1 x ANA / HANA Scaler heatsink
4 x thermal K-Pads (the 4 bottom RAM chips)
2 x thermal K-Pads (the 2 top RAM chips)
2 x GPU and CPU foam shims
1 x tube of High Grade silicone paste (5.0 W/mK)
1 x Silicon Removal Tool Glue / applicator
2 x alcohol wipes (silicone paste cleaning)
1 x DVD drive belt
4 x foam protectors for DVD drive
No drilling required
No sanding
No cutting required
Easy installation
Very high success rate
Fixes most RROD, E74, RLOD, no Video/Audio errors
High build quality
Trusted Xecuter Design

On sale at all major retailers MSRP £19.95 / €24.95 / $29.95 (Quantity discount available)

Post by **ovaler** » Mon 28 May 2012 17:47

Mine is also already 1 year old with the old kit. This one, I looked for it on various sales sites but haven't found it yet... I have one to resurrect...

Xecuter Xbox repair kit - Extreme Edition